News:

1400 GTR - A beast

Main Menu

Strange cracks.

Started by GTRpilot, November 13, 2015, 03:19:03 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

GTRpilot

Washing the bike and found a couple of small hairline cracks on the left top grey panel leading up to the heated grip controller on the left. Popped open the pocket and found that had cracked around the lower fastener which was missing. Nothing has hit the bike as far as I know and no damage to any panels etc, just these small cracks in the plastic. Might have to replace it.  :rolleyes: 
XJ600, VFR800, CBR1100, Varadero1000, CBR1100, STX1300, GTR1400 ?

virginiajim

Resistance is futile  2020 Indian Roadmaster  Waiting on the current Doctor to regenerate...

Burchy

Who last serviced it?  Probably had to come off to do an air filter change.....
2025 Versys1100SE<br />1993 ZXR400<br />1991 ZXR750R<br />1979 GS850G

GTRpilot

Serviced by me, all okay when I put her together, and that was well before I noticed the cracks.
XJ600, VFR800, CBR1100, Varadero1000, CBR1100, STX1300, GTR1400 ?

SirToU

I thin I had the same cracks but on the right side panel, just below the bottom right fixing.

I think it was more to do with over tightening the fixing and vibration causes the crack.  I think that inner panel cost me something like £86.00 to fix. 

:-(
Ride it like it was stolen...
Motogymkhana UK Champion 2011-2014

GTRpilot

Quote from: SirToU on November 16, 2015, 06:25:45 PM
I thin I had the same cracks but on the right side panel, just below the bottom right fixing.

I think it was more to do with over tightening the fixing and vibration causes the crack.  I think that inner panel cost me something like £86.00 to fix. 

:-(

Thanks, I was hoping It wasn't my fault  :whistling:
XJ600, VFR800, CBR1100, Varadero1000, CBR1100, STX1300, GTR1400 ?

Redrat

I blamed my servicing dealer for damaging the left hand panel by tightening the bolt too much. He provided the panel (£50) which he was not prepared to fit. During the removal process I found the glove box outer edge broken and screw driver marks under the lid. The bike is garaged and never left unattended - so no idea how all this happened. The glove box is listed at £200 so the damaged rim was glued back into place. I think that some plastics get brittle and fracture through movement as I have just found similar damage to one of the windscreen cover plates.
It's big, it's blue and the plate says 'you have just been overtaken by a pensioner' and that really pisses sport bikes off.

GTRpilot

Quote from: Redrat on November 20, 2015, 11:02:55 PM
I blamed my servicing dealer for damaging the left hand panel by tightening the bolt too much. He provided the panel (£50) which he was not prepared to fit. During the removal process I found the glove box outer edge broken and screw driver marks under the lid. The bike is garaged and never left unattended - so no idea how all this happened. The glove box is listed at £200 so the damaged rim was glued back into place. I think that some plastics get brittle and fracture through movement as I have just found similar damage to one of the windscreen cover plates.

My glove box is broken around one of the fasteners as well, the fastener and corner of the box is missing, don't really want to fork out £200 for a new one though!!!
XJ600, VFR800, CBR1100, Varadero1000, CBR1100, STX1300, GTR1400 ?

topo

Some time ago ,I had the same cracks....up to the heated grip controller.  :sad:
Happened during my trip to Marocco , so i thought was for the weather too hot.....the sun....but was not for that  :no: because too many gtr have that problem !!
If you change it i reccomend you to check inside the nearest glove compartment, that in my case was cracks also !  :wacko:

GTRpilot

Quote from: topo on November 23, 2015, 04:59:57 PM
Some time ago ,I had the same cracks....up to the heated grip controller.  :sad:
Happened during my trip to Marocco , so i thought was for the weather too hot.....the sun....but was not for that  :no: because too many gtr have that problem !!
If you change it i reccomend you to check inside the nearest glove compartment, that in my case was cracks also !  :wacko:
Yes, mine has cracked as well  :censored:
XJ600, VFR800, CBR1100, Varadero1000, CBR1100, STX1300, GTR1400 ?

virginiajim

If any of you guys get time, I would very much like to see what you are talking about in the way of cracks.  I want to see if it's happening over in the US.
Resistance is futile  2020 Indian Roadmaster  Waiting on the current Doctor to regenerate...

Redrat

This photo shows the brittle area around the bolt and the crack on the edge of the glove box - the other break is hidden by the lid.
It's big, it's blue and the plate says 'you have just been overtaken by a pensioner' and that really pisses sport bikes off.

O.C.

Certainly looks like over tightening
BE KIND...


ROG .

viper

over tightened and caused a stress line, a few trips out and the stress line develops into a crack

virginiajim

Looks like plastic gone bad to me..

Anyway, can I borrow that pic for our forum?
Resistance is futile  2020 Indian Roadmaster  Waiting on the current Doctor to regenerate...