Bolt size help needed

[bobbyspit]

I am in the process of restoring my GTR. Strip and repaint of the wheels and rear swing arm inc final drive , I have however been stumped by size of the rear bolt for the diff one bolt that holds the diff onto the swing arm.
Is this a special tool from kwak? I have 28/30/32 ans none are close
Any advice appreciated
Rob

[Tynesidebob]

Go to kawasakioriginalparts.com
They have all the parts diagrams for everything Kawasaki.
If the parts list doesn't tell you the size, post the part number on here and we'll have a look for you.

[Moogus]

Is this the bigger, lower bolt on the rear of the final drive casing? If so, I believe it's 27mm, accessed from the wheel side.

[Moogus]

Just re-read my last post. Meant to say accessed from the outside, under the black cap.

I can confirm,  it's defo a 27mm socket

[Boomer]

You will need to look it up for your year. For my 2008 I believe it is part
33032-0024SHAFT-SWING ARM,REAR GEAR CASE
https://www.kawasakioriginalparts.com/road-bikes.html?blockref=99912-1486.E-08&machineid=754&year=2008&model=ZG1400A8F&country=GB

[bobbyspit]

27mm I now believe guys thanks for all the help and advice
Rob