Blanking plate/grommet

[StickyOne]

I want to do something similar to one of the recent posts and fit the switchback led running lights.
But I also want an on/off switch in the circuit.
The blanking plate/grommet on the left the headlight adjuster is the obvious location but I have a problem that I didn't envisage!
I can't get the blank off!
Is it a 'false' blank which is molded with the back plate that will require drilling out or is it a removable plastic grommet that just requires a lot of force to unclip it?
Advice eagerly awaited please.

[wildybeast]

Think its held on with a nut from behind. some body will confirm

[PRD]

Dont muck up my old bike!!

[StickyOne]

Dont muck up my old bike!!

Well I won't if I find out how to get this blanking thingy off!

[wildybeast]

http://www.kawasakioriginalparts.com/road-bikes.html?blockref=99912-1648.G-08&machineid=792&year=2013&model=ZG1400CDF&country=GB

[StickyOne]

Thank you for the link.
It doesn't answer my question though.

[mikeyw64]

Ah my switchback thread and yes I want to pop a switch in at some point.

Anyways back to the question,saw a thread somewhere where that blanking plate was drilled to take a second power point.

I think it may be moulded in

[STX1300man]

StickyOne

This YouTube video will answer your question. Wind forward to 3:00

https://www.youtube.com/watch?v=-68Enejvmeg

[StickyOne]

That indeed answers my question.
No job is ever as straight forward as you first think it will be.
So much for thinking I can pop off the grommet!

[mikeyw64]

StickyOne

This YouTube video will answer your question. Wind forward to 3:00

That's what I was thinking of