Rubber pillion pegs.

[GTRpilot]

Think I'll be needing some, any ideas? 

[O.C.]

http://www.motorcyclelarry.com/index.php?main_page=product_info&products_id=158 

A frequently asked question................ I think Kawasaki ER6 pillion pegs fit directly and they are rubber covered,     

[GTRpilot]

http://www.motorcyclelarry.com/index.php?main_page=product_info&products_id=158 

A frequently asked question................ I think Kawasaki ER6 pillion pegs fit directly and they are rubber covered,     

Thanks 👍

[GTRpilot]

Hmmm, sold out at the moment.

[dokterdave]

Newer FZ6 pillion pegs are a direct replacement.
If you buy new from the dealer order only the individual parts you need, the rubber bit and the alloy bit.
The ball, spring, plate and pin are used from the original peg.

[GTRpilot]

Newer FZ6 pillion pegs are a direct replacement.
If you buy new from the dealer order only the individual parts you need, the rubber bit and the alloy bit.
The ball, spring, plate and pin are used from the original peg.

Thanks you sir, very helpful 

[dokterdave]

Thanks you sir, very helpful 

Try and get them from a breakers.
OEM are about £40 EACH

[Boomer]

http://www.ebay.co.uk/itm/Pillion-Rear-Footpeg-Assembly-for-Yamaha-FZ6-04-09-/321991016804

[GTRpilot]

http://www.ebay.co.uk/itm/Pillion-Rear-Footpeg-Assembly-for-Yamaha-FZ6-04-09-/321991016804

To good to be true, but worth a whirl 

[GTRpilot]

Arrived today, look the business 

[GTRcol]

Hi,
Quick question, was it £6.95 for a pair of pegs or just the one. The ebay pic shows a pair?
After some myself.
Got a pic of them fitted?
Cheers.

[GTRpilot]

Hi,
Quick question, was it £6.95 for a pair of pegs or just the one. The ebay pic shows a pair?
After some myself.
Got a pic of them fitted?
Cheers.

For a pair, with fitting kit, but I understand it's just a straight swop for the metal pegs, fitting tomorrow, will post a pic.

[GTRpilot]

These don't fit  , the hole for the small spring and ball on the Kawasaki peg is on the inside of the peg, i.e. nearest the bike.
On these pegs it's on the outside of the peg, so when you try and put the peg in the up position, it pops out, also the peg droops down when in position, so back to the drawing board 

[Boomer]

Sorry  , someone said FZ6 pegs fitted but were expensive.
Then I saw those on ebay for nearly naff all.

I have GTR1000 pillion pegs on mine but they are quite bulky and they have been extensively modified.

[Charlie747]

We have FJR pegs on lowering brackets

Nice solid bit of kit