Aftermarket exhaust for a 2015 GTR

Started by mark1400, May 18, 2015, 05:15:28 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mark1400

Hi there, I pick up my new bike on Saturday and the only modification I really want to make is to put a slightly louder pipe on.
I'm considering the latest offering from Scorpion.... I'm guessing it's not too loud with the battle removed but will sound a little fruity I hope.

My question is all the exhaust systems I have seen ( slipon type ) seem to cover up to the 2013 bike, Will these exhausts fit the 2015 bike?

Many thanks in advance.
Mark.

nightrider

Why do you want to remove the baffle , if you want it louder then get the right can to start with ,running with out a baffle in will not do it any good, 

Lonewolf

Beowulf are good, as are Remus, etc. Plenty out there.

KENNETH0405

Life's too short to piss about so go on.... live it NOW!

Lonewolf

Quote from: KENNETH0405 on May 18, 2015, 07:15:17 PM
Mark try the vance & hines cs1


Does that require some re-tuning if you fit that particular can?

markmacd

Quote from: mark1400 on May 18, 2015, 05:15:28 PM
Hi there, I pick up my new bike on Saturday and the only modification I really want to make is to put a slightly louder pipe on.
I'm considering the latest offering from Scorpion.... I'm guessing it's not too loud with the battle removed but will sound a little fruity I hope.

My question is all the exhaust systems I have seen ( slipon type ) seem to cover up to the 2013 bike, Will these exhausts fit the 2015 bike?

I bought a Scorpion for mine. Carbon. They look and sound brilliant on the bike. I took the baffle out , no remapping needed.

On my previous bike , I fitted a Beowolf and I would recommend them too.

Both look and sound great IMO.
Cheers
Mark

Many thanks in advance.
Mark.

mark1400

good point Nightrider......i need to look into it a bit more i guess.
Thanks for the replies guys. 

Charlie747

Quote from: mark1400 on May 18, 2015, 10:02:44 PM
good point Nightrider......i need to look into it a bit more i guess.
Thanks for the replies guys.

I've got Beowulf and Remus and had both (not at the same time Pross  :mfr_lol: ) on the bike 2011 model yr.

No problems with ether can + sounds nice and fruity  :banana:

tapps

i had a remus on my 12 plate gtr,it was 2nd hand when i acquired it,i had it on for about 2.5 years,it was looking shabby,i replaced it about 6 months ago with a SCORPION (carbon) finish,i prefer the scorpion over the remus.sound's good with the baffle out,it's not to intrusive.

topo

I bought new and mounted Remus Exacone Titanium exhaust  on my Gtr ...great sound and looks nice........and very important , italian police not complain about it :mfr_lol:


mark1400

Beowulf, Remus & scorpion all seem like good options....am i right in thinking that if the baffle is removed on all of them there will be fule issues & re mapping would be needed.


KENNETH0405

Hi Wolf no remapping / tuning to run with the vance &hines cs1, ive had no issues on my 07 and i run without the baffle , pulls great and no surging ,drawing back etc sounds awesome
Regards Kenny
Life's too short to piss about so go on.... live it NOW!

topo

Quote from: mark1400 on May 19, 2015, 04:12:15 PM
Beowulf, Remus & scorpion all seem like good options....am i right in thinking that if the baffle is removed on all of them there will be fule issues & re mapping would be needed.

NO remapping/tuning needed with remus also :smiley:

Quote from: KENNETH0405 on May 19, 2015, 05:43:51 PM
Hi Wolf no remapping / tuning to run with the vance &hines cs1, ive had no issues on my 07 and i run without the baffle , pulls great and no surging ,drawing back etc sounds awesome
Regards Kenny

I like a lot looks and sound of Vance&Hines cs1 also... :agree:

bigge

 I went for an Akropovic and have to say it sounds awesome with the baffles out.
A bit expensive but decided I wanted to be different lol.

jonathan

Quote from: mark1400 on May 18, 2015, 05:15:28 PM
Hi there, I pick up my new bike on Saturday and the only modification I really want to make is to put a slightly louder pipe on.
I'm considering the latest offering from Scorpion.... I'm guessing it's not too loud with the battle removed but will sound a little fruity I hope.

My question is all the exhaust systems I have seen ( slipon type ) seem to cover up to the 2013 bike, Will these exhausts fit the 2015 bike?

Many thanks in advance.
Mark.

So far nobody has actually answered his question. Yes all the exhausts are the same fitment. There is no change across model years.