What did you do to your bike today?

[virginiajim]

True..

[Charlie747]

 

[pross]

Had to remove stereo as now no room under the seat for it :(
Because......

Happy Zeb

Another seat zeb

[pross]

After a bit of tuition from people in this madhouse
I removed the screen and side fairing to run New wiring and fit the wiring  bullets for my satnav and remove the previous owners  wiring to the socket on the dash.
Removing was as easy as members said thanks Debs / Wolf in your words a piece of piss.

[Zebedee]

Top job pross and yup another seat :)

[Charlie747]

Top job pross and yup another seat :)

But is this................THE ONE ???????....................

[Boomer]

Today I was informed that the bits to fix my front bevel drive are in.
So, hopefully this weekend I can get it all reassembled and running again.
Commuting by car is doing my head in.

[pross]

Today I was informed that the bits to fix my front bevel drive are in.
So, hopefully this weekend I can get it all reassembled and running again.
Commuting by car is doing my head in.

tell me about it I commute 15 miles 20 mins on the bike that's being cautious 45 mins to 1hr 1/4 in the jeep
counting to 10 to prevent rage and without pushing them out of the way 

[pross]

But is this................THE ONE ???????....................

only god will know that and he aye tellin 

[Boomer]

My commute is 60 miles each way of M25. 1hr 15 by bike, 2hrs 45 by car.

[TRIGGERHAPPY]

Finaly got time to install the PCV and the O2 eliminators.
Much smoother idle and gone are anoying surge at steady trottle.
And the power delivery are superb.

Removing the flies and adding a fuel management
or reflashing the ECU (probably a better solution) transforms the bike.

I think now it works the way it should have done of the facory line.

The power are not to brutal. It pulls smooth from 1000 rpm in 6th.gear.

Making long trips much more relaxed, less gearchanges.
Just roll the trottle and of she goes.

[virginiajim]

Working on the front brakes and replacing the TPS battery in the front wheel.

[TRIGGERHAPPY]

Put on new set of tires. PR4 GT with 55 rear.  And new breakpads at  the front.

[Boomer]

Today I disassembled the rear end again and removed the front bevel box to fix an oil leak. Hopefully should be fixed now with new bearing and nut. Then cleaned the bike to get all the oil off the rear end. Fingers crossed it will be reliable again now.

[Zebedee]

Hard work should always produce +ve benefits