hugger catching on tyre

[steve.w25]

Hi its my first post so here goes ive just fitted a skidmarx hugger and it catches on  the tyre on the right side lower(exhaust side) ive checked all the brackets and fixings and cant see anything obviously. Wrong any ideas  or advice would be welcome

[Lonewolf]

Hi, I had the exact same issue on my first GTR. I had a new rear tyre fitted and the tyre initially rubbed constantly on the hugger. The dealer spent ages trying to fathom out what the issue was and did eventually solve the problem by adding some spacers and tweaking the brackets.

What I didn't understand was that the hugger had been on for 1000's of miles and had never been an issue even when the previous tyre was new.

[doebag]

When I fitted mine, I needed a few washers in strategic places just to get the curve right so it missed the tyre.

[Kwikasfuki]

When I was greasing the splines on the new bike I noticed the hugger was catching. Instead of trying to fix it, I just replaced with the one off my old GTR. I couldn't be bothered with messing about with washers etc

[O.C.]

Its not unusual for the brackets on Skidmarx huggers to require a little tweaking in order to make them fit correctly, a second hand one that I once purchased needed a fair bit of 'adjustment' I then cleaned the brackets re-painted them and fit the hugger with new bolts etc and it was fine for many thousands of miles    

[steve.w25]

Hi thanks for the replies  I see what you guys mean having spent the last couple of hours adjusting the brackets been for  a little jolly and all seems fine.

[stoketim]

hi Steve do we have another Norfuk bor here then?