Tool holder security screws!

[coman37]

Came across these dreaded screws myself today... who the hell knows what possessed Kawasaki to use securuty screws here of all places. Actually it's probably so people go to the dealer to get stuff done.

Anyway, the purpose of this resurrection post is to inform anyone else doing a search how I did it, the best way IMO, or when all other methods fail... simply use an appropriately sized bolt extractor socket. All four off within 2 minutes, no problem!

You can get a 10pc set for about £30ish on fleabay and they're a very useful tool to have. It's basically one of these:



Next dry day that fuzeblock and alarm WILL be fitted.


While you are waiting for a dry day you can spend time properly washing your hands!! 

Coman

[Stephen.Stallebrass]

While you are waiting for a dry day you can spend time properly washing your hands!! 

Picture is from google images...

Close but no cigar 

[Debs]

I used a hammer and screwdriver to get mine out.. If I can do it then anyone can 

[Ant]

I used a hammer and screwdriver to get mine out.. If I can do it then anyone can 

Errrr, I wouldn't be so sure, I would say you have more mechanical knowledge and common sense than a lot of people I meet !!

[Debs]

Errrr, I wouldn't be so sure, I would say you have more mechanical knowledge and common sense than a lot of people I meet !!