sat nav mount (help required)

[beemanjohn]

 hi  my name is john just purchased a gtr gt and it has a flat plate fitted for a sat nav . i have a garmin nuvi 50 does anyone know where i can get a ball fitting for it to fit the plate . i have looked at loads on ebay but dont know what will fit . would be  gratefull for any suggestions
         signed confused. com (ha ha )

[Lonewolf]

John, welcome. I'd have a look at this web site



I]http://www.ram-mount.co.uk/?gclid=CI7I2-XYpbcCFYjLtAodBQoAIQ


If in doubt call them and see what they suggest.

[O.C.]

Welcome John hope you get sorted with the mount, let us know how you get on

[beemanjohn]

went to ripon and they have to order everything in which was a pain cos i wanted to see the fittings first to see if was ok . so after a 130 mile round trip i looked at the one off my zzr which fastened in the top yoke . i took out the hex nut on the gtr yoke and glued the rubber/nut in the recess and refitted the yoke nut . BINGO the steel rod with the sat nav ball on the end screwed straight in  . sorted . the orignal one was made by bob telfer (telferizer.com). good bloke and very helpfull.

[Bryn]

went to ripon and they have to order everything in which was a pain cos i wanted to see the fittings first to see if was ok . so after a 130 mile round trip i looked at the one off my zzr which fastened in the top yoke . i took out the hex nut on the gtr yoke and glued the rubber/nut in the recess and refitted the yoke nut . BINGO the steel rod with the sat nav ball on the end screwed straight in  . sorted . the orignal one was made by bob telfer (telferizer.com). good bloke and very helpfull.

That's how my 660 is mounted...

[Rossendale Rider]

Did you say you had a ZZR?

[beemanjohn]

yes i did have got fed up trying to get luggage to fit so i sold it it and got a gtr i had only done 1900 miles on it .

[Gtrtim]

Hi John welcome, I just fitted a mount for my garmin 765 last night, got it from ram-mount, very good quality unit and easy to fit, if you get one make sure you tap down the actual bracket into the stem mount hole...it makes it very secure and stops it wobbling about on the rubber.

Doesn't tell you that in the instructions......