Scorpion Red Power Exhaust

Started by Bongo, May 16, 2013, 10:10:21 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bongo

Interested in the  Scorpion Red Power Exhaust. Has anyone got one fitted? What do they sound like? How do you rate them?

:ohplease:


http://www.ebay.co.uk/itm/310610991882?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
Ali

GTR1400
2 Infinity & Beyond, Back 4 Tea!!!!!

Rexr

Rexr.

Keep it simple......stupid..!!

keith

http://myworld.ebay.co.uk/clickcarparts?_trksid=p2047675.l2559


i have always rated scorpion exhausts,after my zzr has its first sevice i am fitting a pair,they are not cheap but you get a good guarantee  with them ,i dont like the cans with the wrap around brfacket on them ,scorpion do them that attach to your original fixing bracket on your bike frame (well thet do for the zzr ) plenty advertised on e bay ,but i contacted graham at click car parts,i have managed to get a good deal with him ,a lot cheaper than the advertised price,give them a ring if you are interested,i have looked all over for my scorpions and can't get a  better deal .but if you know someone let me know   cheers   keith

bradders94

#3
Hi

I have the Scorpion fitted. In fact they built the system for the GTR on my bike last year. Sounds really good without being overly loud. I run mine with the baffles in, I don't particularly want it loud anyway. The fit is neat and the can looks spot on. Can't really fault it! Nuff said! This is a pic I took on top of the Puy Mary last June during our trip down through France and Spain.

Chris

Bongo

Thanks Chaps. I think its one of the nicer looking cans for the GTR. Saving my pennies up for one.  :yes:
Ali

GTR1400
2 Infinity & Beyond, Back 4 Tea!!!!!


Bongo

Ali

GTR1400
2 Infinity & Beyond, Back 4 Tea!!!!!

Bongo

#7
Scorpion Can arrived and fitted in under 1/2 hour. Looks good and sound just a wee bit baseier than original, will give it a go with out baffles later. A lot lighter in weight as well.

Really pleased with it.

:clap: :clap: :clap: :clap: :banana: :banana: :banana:

Ali

GTR1400
2 Infinity & Beyond, Back 4 Tea!!!!!

keith

hi let us know what it is like with the baffle out i have just had a go at taking out my baffle on my zzr and failed ,there is one bolt at the end of the can and  the baffle  is supposed to pull out couldn't budge mine,so i have left it . scorpion have said it maybe tight with it being new,and to remove the can and knock it through from the other end ,i am too scared incase i damage something ,tell us how you get on

Bongo

#9
Question:

  If the exhaust can body is E marked or BS stamped rather than the baffle been stamped, does that mean your OK to run with the baffles out legally or would Plod see things differently????
Ali

GTR1400
2 Infinity & Beyond, Back 4 Tea!!!!!

patrick

Quote from: Bongo on June 19, 2013, 06:10:14 PM
Scorpion Can arrived and fitted in under 1/2 hour. Looks good and sound just a wee bit brassier than original, will give it a go with out baffles later. A lot lighter in weight as well.

Really pleased with it.

:clap: :clap: :clap: :clap: :banana: :banana: :banana:

you noisey boy racer !! :gun_bandana: :gun_bandana:

keith

Quote from: Bongo on June 19, 2013, 07:14:39 PM
Question:

  If the exhaust can body is E marked or BS stamped rather than the baffle been stamped, does that mean your OK to run with the baffles out legally or would Plod see things differently????
all depends on how loud it is ,but i bet it sounds great,i want to try mine just to see what it is like.i think once you have had them out and refitted them  the first time , it will be a 5 minute job to remove and refit them after that ,

Bongo

#12
Quote from: patrick on June 19, 2013, 07:30:53 PM
you noisey boy racer !! :gun_bandana: :gun_bandana:

Pot Kettle Black with that Beowolf Can of your`s.  :2guns: :2guns: :clap: :clap:
Ali

GTR1400
2 Infinity & Beyond, Back 4 Tea!!!!!

patrick

ah....... but i was stuck with mine as it on the bike when i bought it     :mfr_lol:

Bongo

#14
Quote from: keith on June 19, 2013, 06:35:58 PM
hi let us know what it is like with the baffle out i have just had a go at taking out my baffle on my zzr and failed ,there is one bolt at the end of the can and  the baffle  is supposed to pull out couldn't budge mine,so i have left it . scorpion have said it maybe tight with it being new,and to remove the can and knock it through from the other end ,i am too scared incase i damage something ,tell us how you get on

Taken baffle out, was a very tight fit, can see what you mean Keith, but it did come out without having to remove it off the bike and knock through from the other end. Perhaps a bit of WD40 or such like would help.
Sounds great without the baffle in, very deep base, but not overly loud, not to OTT, I`v heard a lot louder standard cans out and about.
Will leave baffles out now and report back how it goes.   :popcorn:
Ali

GTR1400
2 Infinity & Beyond, Back 4 Tea!!!!!