Transponder Cases

[KeVstrom]

Can you get replacement transponder cases, or maybe even a blank key for the case too? Mines a bit chewed up, theres a chunk missing out of the plastic casing of the key like someones had a go at with with a screwdriver instead of pulling the release catch! And then theyve used the same blunt screw driver to open up the case to change the battery.

Proper butcher job!

Ive check ebay with no joy. Is this a part dept jobbie?

[Debs]

I dont know if you can get a fob from anywhere.. You could ring these guys as they have broken a GTR and may still have the fob

http://www.promotorcyclesalvage.co.uk/index.php

Other than that the cost of a new one is a lot.

http://www.kawasakioriginalparts.com/kawasaki_motorcycle_parts_selection_pfk.php?block_01=F2770&block_02=99912-1648&block_03=mc&year01=2010&ca=GB

Full parts list.

http://www.kawasakioriginalparts.com/kawasaki_motorcycle_parts_block_selection_M30.php?mod_01=99912-1648&year01=2010&ca=GB

[O.C.]

That type of security related parts item is deliberately priced high to deter would be thieves from copying/obtaining them.

It's the same with cars......looks like you'll have to put up with the one you've got Kev or bite the bullet and buy new

You could also try these folk as they often have bikes which are being salvaged and may have a fob 

http://www.dkmotorcycles.com/used-spares/kawasaki_10464/

[KeVstrom]

We are talking about just the outer casing right? Its still priced high?

[O.C.]

We are talking about just the outer casing right? Its still priced high?

Kev, I'm not sure that the outer casing alone will be available, I think it might come as a complete part

Debs is right ~ it looks like part # 21175A is what you need (Control Elec unit) £253.30...ouch 

[100milesaway]

Providing it's working OK, I should stick with the one that looks like a dogs chewed it.

[Debs]

Providing it's working OK, I should stick with the one that looks like a dogs chewed it.

Its only going to sit on your pocket anyway..

[KeVstrom]

Ive found mine doesnt feel securely clipped together, the 2 halves that is, and the internal PCB just falls out if it seperates, which isnt the best thing. I keep mine on a lanyard around my neck for easy access to my alarm fob and security keys. Its not like i can glue it together either. May have to resort to some blue tak.

[viper]

i wonder if a silcone protective case would be the answer, dont know which one would be best , like the car ones

http://www.ebay.co.uk/sch/i.html?_odkw=gtr+key++fob&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0&_nkw=silicone+key+fob+case&_sacat=0

[KeVstrom]

yeah possible idea, however they get a bit furry after a while off your clothes or pockets.

[shaggs147]

How about sliding a bit of heatshrink over it then shrink it with a bit of gentle heat..... or the old fashioned method of a bit of electrical tape?

[KeVstrom]

i think blue taks the way forward

[Burchy]

Or even put a cable tie around it

[KeVstrom]

Nah, I want it to look neat not butchered

[2kwacks]

do you have credit card insurance...  like C.C.P card protection? if so they also cover lost or damaged keys and fobs when my fob was damaged I just claimed for a new fob and key and for it to be programmed. excellent service just sent them the receipt  and they sent a cheque within a week for the full invoice price