Spare screen bolt reqd

[Andy]

I took the advise of not over tightening the 4 black bolts and one has fallen out. Any one got a spare?

[Lonewolf]

I think you are going to struggle with this one, it must have been really quite slack. Probably as well to just order one from Kawasaki or pop to a bolt specialist and get one from there.

[Kwikasfuki]

I took the advise of not over tightening the 4 black bolts and one has fallen out. Any one got a spare?

How much did you tighten it? Mine are hand tight and then just a small 1/4 turn.
A nut and bolt shop should be able to provide one.

[Kwikasfuki]

Just had a look on the parts microfiche and they are £1.18

Part: 92172
Description: SCREW,5MM
Cost: £1.18

You dealer should be able to get you one in if you can't find one from your nut and bolt shop. If you have trouble sourcing one let me know

[Boomer]

Or better yet, if you don't care about them being black, just order some M6 x 12mm long stainless steel button head allen screws.
I buy mine by the bucket full at a local hardware dealer but they can be had on Fleabay and elsewhere.
http://shop.ebay.co.uk/i.html?_nkw=M6+12mm+button&_sacat=0&_dmpt=UK_DIY_Material_Nails_Fixing_MJ&_odkw=M6+12mm+screw&_osacat=0&_trksid=p3286.c0.m270.l1313

[Andy]

Thanks ebay it is, incidentally I'm in Bangor N Wales with a few buddies from N East. Bit damp today but bike was brill

[Lonewolf]

If you buy the silver ones off ebay but you'd prefer them in black just drop a smear of smooth black hammerite on the head. Personally I'd just keep it simple and buy one from a Kawasaki dealer, especially at £1 ish.

[Boomer]

Whoops, these screws are M5. My link is for M6. Sorry.

[Andy]

Whoops, these screws are M5. My link is for M6. Sorry.

I tried a hammer and they still didn't fit :-) Never mind only cost a quid

[Lonewolf]

Just get them ordered from Kawasaki.  ;D

[Boomer]

Sorry Andy. The M6 ones are useful though!  ;)