News:

1400 GTR - A beast

Main Menu

bit of an oil leak

Started by Kawdolph, June 17, 2012, 02:57:07 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Kawdolph

Was out for a spin today came home ,went to cover bike and noticed 2 small areas of oil on the ground so went looking it looks like shaft oil ,c0nsidering i recently had service done which included shaft splines been regreased ans shaft oil changed.hope pic loads but there wasnt a large amount and it seemed to stop but dont know if there is a seal or maybe just a little to much oil put in.Where you put in shaft oil the cap is secured and no oil dripping from there.have had another snoop and when i move the rubber boot on the shaft thats where the oil seems to be gathering and leaking from.

Kawdolph


Barry7

        I had the main oil seal leak from the joint beteew the wheel and the final drive, this happened not long after I added some Activ8 friction reducer to the final drive, and the engine, the camshaft position sensor oil seal soon started leaking as well.........
      Coincidence, I don't think so..........

I will have a look and see if any oil is in the same area as yours and report back.
Never eat Yellow Snow!

O.C.

Cant help, as I've not had any experience of any leaks...sorry
BE KIND...


ROG .

Barry7

Well Kawdolph, I have had a look at my one, and there is no oil at all in any of the places you show, I think you will have to take it in to have it checked out for repair............ Sorry
Never eat Yellow Snow!

Kawdolph

thxs for reply ,i spoke to my mechanic today he thinks he knows whats wrong.