Greasing the splines

[bacaruda]

Mark at CalSci (great windscreens for alot of bikes) has made a website with some useful general motorcycle information.
About grease and greasing splines:

http://www.calsci.com/motorcycleinfo/Shaft.html#Grease

An interesting guy with a small bussines in Sacramento. Dress code in the shop is hawaii-shirt, short and barefooted. beside making great windscreens he raises abandoned german shepherds (had a monster of a dog in the store who planted his nose firmly up my groin and made me freeze up instantly. Not done with the parenting on that one    )

I feel confident with his knowledge and the recommendations from the motorcycle manufacturers, so I will stay with Honda Moly 60 for now and sleeps well at night

[Kwikasfuki]

Mark at CalSci (great windscreens for alot of bikes) has made a website with some useful general motorcycle information.
About grease and greasing splines:

http://www.calsci.com/motorcycleinfo/Shaft.html#Grease

An interesting guy with a small bussines in Sacramento. Dress code in the shop is hawaii-shirt, short and barefooted. beside making great windscreens he raises abandoned german shepherds (had a monster of a dog in the store who planted his nose firmly up my groin and made me freeze up instantly. Not done with the parenting on that one    )

I feel confident with his knowledge and the recommendations from the motorcycle manufacturers, so I will stay with Honda Moly 60 for now and sleeps well at night

Thanks for that link. That was an interesting read.
I have loads of Moly 60 paste

[aljaxon]

how much would i need to do the whole lot? and how much just for when the rear wheel comes off?
i can buy it in 100gm 500 gm and 1kilo tubs
would 100 gms do?
is this stuff here any good?
http://www.ebay.co.uk/itm/AS60-60-Moly-Assembly-Paste-100-gram/131150866916?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222006%26algo%3DSIC.FITP%26ao%3D1%26asc%3D20890%26meid%3D5800411818797016414%26pid%3D100011%26prg%3D9312%26rk%3D1%26rkt%3D10%26sd%3D131124871368

[Kwikasfuki]

how much would i need to do the whole lot? and how much just for when the rear wheel comes off?
i can buy it in 100gm 500 gm and 1kilo tubs
would 100 gms do?
is this stuff here any good?
http://www.ebay.co.uk/itm/AS60-60-Moly-Assembly-Paste-100-gram/131150866916?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222006%26algo%3DSIC.FITP%26ao%3D1%26asc%3D20890%26meid%3D5800411818797016414%26pid%3D100011%26prg%3D9312%26rk%3D1%26rkt%3D10%26sd%3D131124871368

Never heard of that brand tbh. You don't need a lot

[BigAlan]

That's what i have just purchased, i intend to do my splines within the next month, from the feedback he has it seems to be good stuff so time to give it a go.

Alan

[bacaruda]

100 gr will do fine for several years of spline-greasing.

Skickat från min GT-I9295 via Tapatalk

[aljaxon]

i asked him a few questions  re the 60 % content he replied
This is the stuff I sell loads to bikers just read the feedback it 60% as the name suggests
Just give me a MSG when your ready
Regards Jim

he does 500 grams for 25 quid and a kilo for 50 quid but if 100 grams is enough ill go for that. although i am a bit of a dauber..
cheers

[Andy]

http://www.youtube.com/v/5jQv3s3n3NM?

Have you a new YouTube channel? https://www.youtube.com/user/valerio5284/videos

[Kwikasfuki]

I might try doing a video with one of those helmet cams and see how it turns out

[Lonewolf]

I might try doing a video with one of those helmet cams and see how it turns out

Did you ever find your Go Pro?

[Kwikasfuki]

Did you ever find your Go Pro?

I did. Thanks for reminding me. I'll mount it this weekend

[MGvalerio]

from looking at your youtube videsos it shouldn't be a problem for you. I intend to do this every 15000 miles. I replaced the seal today

In Italian
guardando il tuo youtube videsos non dovrebbe essere un problema per voi. Ho intenzione di farlo ogni 15000 km. Ho sostituito la guarnizione di oggi

http://youtu.be/BfoVVjbf6LU

[Lonewolf]

So there you go....the time to beat is one minute fifty six seconds!!! 

[MGvalerio]

So there you go....the time to beat is one minute fifty six seconds!!! 

It will not be easy to beat.


MGvalerio.