Valve check.

[Bluesman]

Is this not a DIY job, asking as I'd planned on doing it myself when the time comes.

[PRD]

You are brave!

[doebag]

Is this not a DIY job, asking as I'd planned on doing it myself when the time comes.

Have a read of this thread
http://www.gtr1400.co.uk/forums/index.php?topic=6645.0

I did mine in 2017, I regard myself as a competent amateur mechanic, who has done a number of valve clearance checks/re-shims in the past.
Gaining access on the GTR is hard, there is a lot of bodywork to remove, and you'll need to support under the engine to remove both upper engine mounts.
I did the job over a number of days when the bike was not needed.

[Bluesman]

Thanks guys very interesting, few thousand to go yet, I've done my own on other bikes, will have a good think .................