Stebel horn(s) fitting

[Kylinski]

Hi folks   

My next job on my "to do" list is fitting the two Stebel horns I removed from my ZZR before p/x it.

Anyone fitted these or similar horns?

The standard horn on these big bikes are pathetic at best! 

[BigAlan]

Don't need horns, going to quick to have the opportunity to blast anybody.

😀

[O.C.]

I fitted PIAA to mine bloody loverly deep mellow toot    oh, and easy installation too.   


Like these      

http://www.ebay.co.uk/itm/PIAA-Motorsport-Twin-Horn-Kit-Slim-Two-Tone-Sports-Electric-Slender-Horns-H012-/381755454922?hash=item58e265f5ca:g:zbMAAOSwFdtXyCHn   

[Rusty]

Well ... I myself didn't fit it as some on here will know too well of my DIY incompetance, but my friendly K dealer did so and it was a Stebel ... the result ? Fantastic. You are right to say that for such a big bike the horn was pathetic 

[PRD]

Sound bomb on mine. Really good.

[Kylinski]

I fitted PIAA to mine bloody loverly deep mellow toot    oh, and easy installation too.   


Like these      

http://www.ebay.co.uk/itm/PIAA-Motorsport-Twin-Horn-Kit-Slim-Two-Tone-Sports-Electric-Slender-Horns-H012-/381755454922?hash=item58e265f5ca:g:zbMAAOSwFdtXyCHn

Those look nice  whereabouts on yours are they fitted?

[pross]

I also fitted the PIAA ones as OC says easy job.
Used the same standard bracket and with the wire that comes with them made the horn link just needed the crimps which I bought for penny's of E-Bay

A wiring diagram below showsthe stebel horns description it's the same for the PIAA.

[Kylinski]

Silly question. Does the GTR have twin horns? There are no relays then?

[pross]

Silly question. Does the GTR have twin horns? There are no relays then?

No mate a single horn just in front and above  the radiator on a horse shoe shaped bracket that's why it's an easy change holes are in the bracket for the twin horns a single fixing bolt hole use the original wiring to the new horn and make a link to the second horn 

[mikeyw64]

I fitted PIAA to mine bloody loverly deep mellow toot    oh, and easy installation too.   


Like these      

http://www.ebay.co.uk/itm/PIAA-Motorsport-Twin-Horn-Kit-Slim-Two-Tone-Sports-Electric-Slender-Horns-H012-/381755454922?hash=item58e265f5ca:g:zbMAAOSwFdtXyCHn

These Loki the same just branded differently and cheaper

http://m.ebay.co.uk/itm/New-WRC-39-8mm-12V-Dual-Twin-Tone-Car-Slender-Snail-Horn-Set-Kit-112dB-500-400Hz-/252699710008?_trkparms=aid%253D222007%2526algo%253DSIC.MBE%2526ao%253D1%2526asc%253D20150519202351%2526meid%253Dc65a4866248c43f8bede020dd909d8cc%2526pid%253D100408%2526rk%253D2%2526rkt%253D10%2526sd%253D331536958461&_trksid=p2056116.c100408.m2460

Sent from my Wileyfox Storm using Tapatalk

[O.C.]

Those look nice  whereabouts on yours are they fitted?

they fitted onto the existing mounting     

[O.C.]

I also fitted the PIAA ones as OC says easy job.
Used the same standard bracket and with the wire that comes with them made the horn link just needed the crimps which I bought for penny's of E-Bay

A wiring diagram below showsthe stebel horns description it's the same for the PIAA.

           

[Kylinski]

Cheers all 👍 Seems much better than finding a mounting spot for Stebels then wiring in relays etc.

[davetherave]

These Loki the same just branded differently and cheaper

http://m.ebay.co.uk/itm/New-WRC-39-8mm-12V-Dual-Twin-Tone-Car-Slender-Snail-Horn-Set-Kit-112dB-500-400Hz-/252699710008?_trkparms=aid%253D222007%2526algo%253DSIC.MBE%2526ao%253D1%2526asc%253D20150519202351%2526meid%253Dc65a4866248c43f8bede020dd909d8cc%2526pid%253D100408%2526rk%253D2%2526rkt%253D10%2526sd%253D331536958461&_trksid=p2056116.c100408.m2460

Sent from my Wileyfox Storm using Tapatalk

Please excuse my idiotic question but  do you need any relays with these or can you just fit extra wires in to the existing horn wiring for these to work ??  (I'm an electrical dunce)

[O.C.]

no relays on mine