Mirror lifter uppers

[Charlie farley]

So I saw this on another forum and decided to have a go ( obviously far to much time on my hands of an evening ) made out of delrin the lift is 27mm so I now can glance down at the mirrors and only see the very top edges of the panniers and the bar weights , and piggy was no help as he suggested 300mm for that scooter look .
Charlie

[PRD]

That Piggy, I don't know..........

[Charlie747]

Interesting 

[O.C.]

That Piggy, I don't know..........

seems to me that piggy needs a good slap      

[Charlie farley]

I just can't go around slapping imaginary friends there the only ones ive got 

[O.C.]

maybe an imaginary slap then   

[virginiajim]

I do like the technical term 'mirror lifter uppers'.  Has a nice ring to it.

[PRD]

Is it made by Playtex to lift and separate.

[Charlie farley]

These are made by charlie Farley so I get a better view of the rear , I dont think my bike's bum looks bigger 

[trousersnake01]

Yes,  really like that,  what did you use,  I don't recognise the item and how can I detach the mirror so I can see how it's held please

[pross]

These are made by charlie Farley so I get a better view of the rear , I dont think my bike's bum looks bigger 

That gap created looks ideal for some lights 

[Charlie farley]

Yes,  really like that,  what did you use,  I don't recognise the item and how can I detach the mirror so I can see how it's held please

There are 3 screws under the support if these are undone the mirror will fall off so make sure you keep hold of it , delrin is a hybrid engineering nylon used for lots of things ( gears,bearings,rollers ect ) it is self lubricating oh yes vicar.  All thats needed is to machine the profiles + the amount of lift you require there is a peg that takes the load of the spring cam and it would be best if also to replicate this . I also machined a hole in the middle for the indicator wires as I put led strips on the mirror housing .
Hope this helps
Charlie
Pross if you put lights in the hole the mirror casing my hit when there folded backwards depends how big the lights are I suppose.

[O.C.]

There are 3 screws under the support if these are undone the mirror will fall off so make sure you keep hold of it , delrin is a hybrid engineering nylon used for lots of things ( gears,bearings,rollers ect ) it is self lubricating oh yes vicar.  All thats needed is to machine the profiles + the amount of lift you require there is a peg that takes the load of the spring cam and it would be best if also to replicate this . I also machined a hole in the middle for the indicator wires as I put led strips on the mirror housing .
Hope this helps
Charlie
Pross if you put lights in the hole the mirror casing my hit when there folded backwards depends how big the lights are I suppose.

great avatar Charlie,  is that piggy in disguise      

[Charlie farley]

Don't give the game away O.C 

[O.C.]