News:

1400 GTR - A beast

Main Menu

Handle Bar Risers

Started by markmacd, March 14, 2015, 02:33:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

markmacd

Looking into Handle bar risers. Most that I have come across are 2 inch risers by Helibars. Have any of you guys / gals fitted and have you had any problems with them during or after fitting.  Is anyone selling a pair ?

standard risers come in at around £90 but seen some with built in ram mount and additional power outlet also that cost quite a bit more.

Comments appreciated

viper

ive got the 2 inch risers , make a small but nice difference, pushes the bars up and slightly nearer to you .

I did fab something up as a trial if I can find a picture, it consisted of 3 long bolts and some spacers.

the cables will all stretch with no issues , might just have to relax a cable tie here and there , from memory you might need to unbolt your brake pipe union

viper

these were rock solid but only a trial before I got the proper risers





markmacd

Quote from: viper on March 14, 2015, 04:15:42 PM
these were rock solid but only a trial before I got the proper risers






Thanks, I purchased the GTR in Sept, but only did a few hundred miles and then Job changed so parked it up till just recently. This new job I will be doing quite a few work miles, so getting a wish list of mods. I had a 170 mile round trip the other day and thnk definitely need risers as the reaching over did feel quite uncomfortable. Where possible just rode 1 handed and sat up straight and was fine. Risers, Tank protector and Rear Hugger are my immediate priorities I think.

nightrider

Gemar do them for the gtr but the price is a rip off ,I got some for my ktm and they was only £28 from Germany , for two bits of alloy they are two expensive ,

wildybeast

I have the 2 inch helibars risers.Still not happy with the reach so ive gone for some riser adapters which will bring them closer still.Advanced sportouring .com.

viper



I bought this 2 inch block of aluminium off ebay , you could always drill the holes and use a grinder and a vice to fashion it into a respectable shape. Ali is very soft and easy to work with

viper


Zebedee

#8
I got 2" pullback risers  these also make them a little wider  no modification required to any cables or hoses can't remember who made em off the top of me head think they came from the States  $160 www.advancedsporttouring.com
Zebedee

nightrider

Quote from: viper on March 15, 2015, 05:34:56 PM
some heli risers on ebay now, expensive at £65 for 2nd hand but if they don't sell you could always make an offer

http://www.ebay.co.uk/itm/Kawasaki-GTR1400-50mm-handlebar-raisers-excellent-condition-/191537047741?pt=UK_Motorcycle_Parts_13&hash=item2c987f68bd
.  Just had a look at these on eBay why do people try to rip you off on the postage charges ,£9 on delivery , £4 first class is what it should be ,robbing sod ,hope   No body off here,

Lonewolf

Quote from: nightrider on March 16, 2015, 08:04:15 AM
.  Just had a look at these on eBay why do people try to rip you off on the postage charges ,£9 on delivery , £4 first class is what it should be ,robbing sod ,hope   No body off here,




It's not just a question though of postage charges, you have to factor in, suitable packaging, insurance, signed for service, petrol, your time  etc. It all adds up, it's not me selling them before you ask but postage charges these days are ridiculous. I sell a few bits on Ebay from time to time and believe you me it's not as profitable as it used to be!




nightrider

I use Hermes to send items I sell on eBay ,you can send a bike seat for £6 deliverd ,even bike exhausts are only up to £10 to send , to send two small lightweight items for £9 is a rip off, read his feedback and somebody else has moaned about the postage he has charged , looking at the prices for risers for the gtr a lot of them seem to be in the USA and are a lot cheaper than here even with postage,,,, :biker3:

pross

Quote from: nightrider on March 16, 2015, 04:34:02 PM
I use Hermes to send items I sell on eBay ,you can send a bike seat for £6 deliverd ,even bike exhausts are only up to £10 to send , to send two small lightweight items for £9 is a rip off, read his feedback and somebody else has moaned about the postage he has charged , looking at the prices for risers for the gtr a lot of them seem to be in the USA and are a lot cheaper than here even with postage,,,, :biker3:

That's a problem on fleabay some people do up the postage to recover some of the fees charged .
On the site zeberdee mentioned I prised some up with delivery 120$
Pross

markmacd

Quote from: Zebedee on March 15, 2015, 07:54:40 PM
I got 2" pullback risers  these also make them a little wider  no modification required to any cables or hoses can't remember who made em off the top of me head think they came from the States  $160 www.advancedsporttouring.com

They look good. I have just sent them an enquiry t get an estimate to have them shipped over to UK (or confirmation of a UK agent). The are based in Husdon, FL.

Ill post their reply as sure other members might be intersted

nightrider

The pull back ones look good ,fancy some of them , :biker3: