sat nav mounts. What do you use.

[markmacd]

I am looking for a mount for the sat nav. Not bothered about hardwiring, so looking for something to fit to the bike that I can quickly attach a waterproof zip up cover.

I have seen a perch on ebay, but thought id see what you guys are using to see if anything is better.

Ideas/Pictures/Links are much welcome.

[viper]

I had the original gtr mount that attaches to the base of your bars, but found it whey too low.

Ive had for a few years the attachement that goes into the centre yolk hole and then ive used a long ram ball mount that raises the satnav up to a position that's good for viewing and does not obscure the clocks

[Debs]

This is a good one..

http://www.ram-mount.co.uk/clutchbrake-ubolt-handlebar-mount-with-1-ball-p-1289-c-281.html

[markmacd]

This is a good one..

http://www.ram-mount.co.uk/clutchbrake-ubolt-handlebar-mount-with-1-ball-p-1289-c-281.html

How do they fit as the bars of the Gtr are not round bars ?

[Debs]

How do they fit as the bars of the Gtr are not round bars ?

They are round Mark... Remove the rear part of the Clutch or Brake res mount bracket and replace it with this mount...

Someone on here has already done it

[Debs]

There is also this one..

http://www.ebay.com/itm/151573172787?redirect=mobile

[virginiajim]

This is a good one..

http://www.ram-mount.co.uk/clutchbrake-ubolt-handlebar-mount-with-1-ball-p-1289-c-281.html

That's the one I use.  For weather proofing I steal a few of the grand kids sandwich baggies to take with me as I don't use a MC specific gps.

[Debs]

That's the one I use.  For weather proofing I steal a few of the grand kids sandwich baggies to take with me as I don't use a MC specific gps.

You got a pic of it fitted Jim? so Mark can see

[virginiajim]

Let me check...

Working on getting it off the phone and uploaded to the site.. (bear in mind, I've started my Saturday night drinking festivities...)  If it's a little blurry then it's reflecting how I'm seeing it.

In looking at it, the bracket that holds the brake master cylinder is replaced by the ram mount piece.  I've got the one with the two balls on it because sometimes I add other stuff...I think.

Actually, this is the one I have...better have two balls than 1 I always say.  That way you're prepared.

http://www.ram-mount.co.uk/motorcycle-handlebar-base-with-two-1-balls-p-1286.html

[garfield1974]

Oh, hell.

Anybody knows how to delete post ? 

[Stephen.Stallebrass]

I use my Garmin 660 cradle with a RAM mount that attaches to the Helli Bar Risers. I have RAM ball mounts attached to the Clutch and Front Brake assemblies too - not for SatNav as I like it lower down - these are for my SPOT2 Tracker and whatever else I might want to attach like my Drift Ghost camera.

[Dai Version]

I was thinking of one of these .....  http://www.motorcyclelarry.com/index.php?main_page=product_info&cPath=46_59&products_id=186&zenid=59odo6qoredgqb810i69jelmq5

Darn it ... How to you post a link?

[Stephen.Stallebrass]

Darn it ... How to you post a link?

What like this:

RAM BALL RESERVOIR COVER

[Debs]

What like this:

RAM BALL RESERVOIR COVER

That's what I have on both reservoirs. 

[Dai Version]

What like this:

RAM BALL RESERVOIR COVER

Yes ... Like that..... How'd you add it as a link not just paste the code/address letters?