hard wiring a garmin 660

[tapps]

I don't realy want to strip the panel's off the bike to wire it up,is there an easy to get to connector to enable me to do this,i'm even contemplating letting someone who know's what there doing do it for me,at the end of the day it's only 2 wire's,hardly rocket science I know,dont want to bodge installing it.

[Debs]

Don't be such a wuss. 

Screen off.... Left hand upper cover off... Accessory wires inside the rubber boot. Easy Peasy. 

OR bring it to Bournemouth and I will do it for free... 

[Zebedee]

Or take the black side infill panel off  and connect into the aux leads you will need to take centre cover off the tank also.

[pross]

Don't be such a wuss. 

Screen off.... Left hand upper cover off... Accessory wires inside the rubber boot. Easy Peasy. 

OR bring it to Bournemouth and I will do it for free... 

Hi debs.
Your the expert how easy is it to get the panels off a 2008/9 mine is the one with the storage on the tank 

[Lonewolf]

It's a piece of piss, that's how easy it is!

[viper]

you could use a scotch block/pozi tap connected to your side light bulb feed , you can get to this from under the headlight part of the fairing

[pross]

It's a piece of piss, that's how easy it is!

What is Mr wolf wiring or removing panels 

[Debs]

Or take the black side infill panel off  and connect into the aux leads you will need to take centre cover off the tank also.

You don't have to take the centre cover off the tank on the 2010+ models to get the side infill panel off.

I don't.. 

[Debs]

Hi debs.
Your the expert how easy is it to get the panels off a 2008/9 mine is the one with the storage on the tank 

Still very easy to do. 

[Lonewolf]

What is Mr wolf wiring or removing panels 

The whole job, panel removal and electrical connection even if you dawdle shouldn't take you more than 30 minutes.

[PCPeteUK]

Don't be such a wuss. 
Screen off.... Left hand upper cover off... Accessory wires inside the rubber boot. Easy Peasy. 
OR bring it to Bournemouth and I will do it for free... 

Well said Deb's - Even I managed it on my own - but Deb's is excellent company if you fancy a Bournemouth trip....

[pross]

The whole job, panel removal and electrical connection even if you dawdle shouldn't take you more than 30 minutes.

Anyone showing how to remove them on here ?.

[SPCK111]

Piglet wire from the front brake light switch. No panels to remove and a five minute job

[Zebedee]

You don't have to take the centre cover off the tank on the 2010+ models to get the side infill panel off.

I don't.. 

Really will have to look into this as would make my life easier :)

[Debs]

Anyone showing how to remove them on here ?.

This guy is doing an Air Filter change but he shows how to take the top infill off.. I suggest removing the screen although this guy don't.

Start at 5:25 to 15:12.

There is an allen bolt in the bottom of the box that needs to be removed which he don't mention.

http://youtu.be/QxDiqMcEaQU