Twin USB ports fitted

[PCPeteUK]

Hi Guys,
I drilled out that 'spare' blanking cover (and the metal plate beneath) and fitted this. It gives me the two USB outlets I needed to run/charge my GoPro and to charge the phone.

Currently have it wired into the accessory wiring and touch wood all is well. 

[Debs]

Thats a nice job and best place to wire it to... Well done Pete.. 

[Richard]

Hi Guys,
I drilled out that 'spare' blanking cover (and the metal plate beneath) and fitted this. It gives me the two USB outlets I needed to run/charge my GoPro and to charge the phone.

Currently have it wired into the accessory wiring and touch wood all is well. 

Nice job.

[dokterdave]

Looks like a plastic cover over the blanking plate.
Where are the USB ports?
Is there a separate voltage dropper/regulator.

[Ros]

And you can charge the GoPro whilst it is in it's case?

[PCPeteUK]

Hi Ros, Yep. I drilled a small hole in the case that aligns with the usb socket and normally plug it with a rubber grommet. But in fine weather I can remove and plug the usb lead in...

[Kwikasfuki]

Nice mod. Where did you get the USB component from?

[PCPeteUK]

http://www.amazon.co.uk/dp/B00CDOBMDU/ref=pe_385721_37038051_pe_217191_31005151_3p_M3T1_dp_1

Obviously I didn't require the bar mount. It lights up when powered with a nice blue glow...

[Charlie747]

Hi Pete


Looks good..............Thanks for the link...............looks like my 1st mod job is on the cards

Cheers

Charlie

[KeVstrom]

I like that, handy to know it exists. Would be fairly easy to piggy back off the other 12 volt socket for wiring.