News:

1400 GTR - A beast

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Ianonortheast

#1
Accessories, Farkels and Mods / Re: Top Box
June 07, 2023, 07:44:09 PM
I have a genuine Kawasaki top box if required
#2
Introductions / Re: New owner here.
May 29, 2023, 08:10:21 PM
Hi Boomer, re the front camshaft sensor leaking oil, is this an easy fix?
#3
1400GTR Discussion / Re: Oil leak
April 22, 2023, 10:04:53 AM
Sorted it. It's one seal fairly easily replaced.
#4
1400GTR Discussion / Oil leak
April 08, 2023, 05:59:30 PM
So I have changed the clutch slave cylinder for one from Oberon. I now have an oil leak which is possibly from the seal around the push rod. Has anyone experienced this previously and if it is the seal, is it an easy job to change or is it a case of engine out and splitting the crankcase?
#5
Introductions / Re: New owner
March 25, 2023, 07:08:23 AM
Welcome to the forum. There is a whole load of advice on here if you need it. Just make sure you keep your tyres correctly inflated with it being a heavy bike.
#6
Introductions / Re: New one..
March 04, 2023, 11:50:51 AM
Welcome! As previously said, there is information on pretty much everything to do with the bike on here.
#7
Do you not have to remove the centre stand if you wish to have the dual pipe option? Surely the practicality of have a centre stand far outweighs a cosmetic look?
#8
General Discussion / Re: Just checking in
February 12, 2023, 06:06:30 PM
Can't wait to get out on mine. Front wheel currently off and will put new wheel bearings in followed by new discs and pads and a ceramic coating on the wheels and paintwork.
Mine still has the original exhaust so will look to change that at some point soon, probably put a Scorpion system on.
#9
Accessories, Farkels and Mods / Re: 12V power
January 31, 2023, 09:07:27 PM
Thank you OC
#10
Accessories, Farkels and Mods / Re: 12V power
January 31, 2023, 05:37:04 AM
Thank you
#11
Accessories, Farkels and Mods / Re: 12V power
January 30, 2023, 10:03:11 PM
Thanks, I take it therefore that I would need to lift the tank to run a positive and negative wire from the battery to the distribution block?


Quote from: O.C. on January 30, 2023, 08:41:20 AMYou need a fuse distribution block....this one is expensive...others are available on fleabay

You will then be able to safely connect a number of devices without any issues
 

https://www.nippynormans.com/f650st-f650cs-f650gs-f650-dakar/fuzeblock-switchable-fuse-panel   
#12
Accessories, Farkels and Mods / Re: 12V power
January 30, 2023, 04:50:37 AM
I think they require 5amps but will need to check with the manufacturer
#13
Accessories, Farkels and Mods / 12V power
January 29, 2023, 06:20:33 PM
Hi, I'm after some advice please. I wish to install a lead for heated clothing, where is the best place to take the power from that will be able to handle the required current?
#14
Give me a shout if you fancy a ride out to the Peak District, I live just outside of Burton on Trent so near to some decent roads
#15
General Discussion / Re: Seasons greetings
January 01, 2023, 07:07:24 PM
All the very best for the New Year one and all