Messages

Mines an 08 Plate and exactly as the OP described.
I even took the Touring Screen off to allow more air flow, mine seems hotter on the Left.
I guess its exaggerated in this Heat, but yesterday did 200 Miles and it was very sticky

Yes, if you remove the "glove box" and fit a plastic "plate" from a Gen2 GTR, it'll fit just fine

You can get a cover for your bike for just over £100 on eBay. For example item no. 222509984699

Cheers

Paul B.

In Principle correct, HOWEVER and its a Biggie the bracket that teh Cover bolts onto differs between the two models and  the hole centres for the covers are wrong.
I was lucky and got a bracket, but as the Glovebox is more useful I just swap them over when I need a Tank bag.
I will post some pics next time I swap it.

I really like the Mirror Carbon effect,
Were they difficult ?

Hi,
I have assembled a conversion kit to remove the Glovebox and Fit the Blanking Plate from later models.
The Blanking plate came from Kawasaki
BUT and ins a B I G BUT the Mounting bracket is wider on the later models,
I was lucky and a forum member had a spare.
I think the Glovebox is more useful so only intend to use the blanking plate and Tank Bag when touring

All sorted then Bru ???   well done.

Yes all done, I will tidy up and put some pics on in the morning. Well Happy

Credit to https://www.murphskits.com/

Mines a Givi Blade
You remove the Red Lens and the existing Silver Trims and replace them with the same Trim (supplied in the Kit) which has LEDS built in.
Cheers

That link can be downloaded to your pc....then you'll always have the workshop manual.

Just a couple of photo's of where you've set the lights into the top box....I was thinking of either behind the reflectors on the lid...or make a bracket that would fit under the topbox???


Brian

I bought this kit for my TopBox
http://www.ebay.co.uk/itm/191367254490?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Click the link below....then scroll down to page 678 for the wiring dia....item 16 is the tail/brake light...hope this can help. Any photos? as I'm thinking of doing the same.


https://drive.google.com/file/d/0BwmYWlzMWkPhUW1sUjIwbzVURHVqUHZUWjh6U0V1UQ/view

Brian

Thanks for being so helpful, unlike the comedian above 
Let me know which pictures you want & I will send them.
I've finished installing in the Top Box its just the Bike Wiring now
Thanks again Bruce

Yes 

Thats really helpful

I'm in the process of fitting an E126 Givi Top Box light Kit to my Box.
To save me messing does anyone know the colours of the wires to the Brake Light .
Thanks in advance

I dont want to swap I want to keep the existing one too

My Bike came with a H U G E Screen, which I'm sure is all well and good in cooler Weather, BUT prevents any real air Flow so makes for an unbearably hot ride on Warm days, so I'm going to go standard for a while.
Bikes an 08 if that makes a difference.
Thanks in advance

You can count me in too please

Is this a forum record for a transaction ?

Imagine if I really want something !!
MANY Thanks