Kawasaki 1400 GTR

1400 GTR - All Models => 1400GTR Discussion => Topic started by: Bluesman on November 04, 2025, 08:52:20 PM

Title: Some info required please..............
Post by: Bluesman on November 04, 2025, 08:52:20 PM
I'm about to start the valve clearance job on my GTR, what are the parts I definitely need to order? I'll change the spark plugs as well. The bike is an 07 and has done 25,556 miles. I believe the check should be carried out at 26000mls.
 


Cheers guys
Title: Re: Some info required please..............
Post by: Burchy on November 06, 2025, 12:05:20 PM
You'll definetly want to replace the valce cover gasket and the spark plug tunnel gaskets.  I'd also think about servicing the fuel pump in the tank while its off
Title: Re: Some info required please..............
Post by: Kwikasfuki on November 07, 2025, 07:18:07 PM
I think it's the tools you'll need. From memory it's very very tight working in there
Title: Re: Some info required please..............
Post by: Bluesman on November 08, 2025, 11:57:55 AM
Thanks guys, appreciate it.
Title: Re: Some info required please..............
Post by: Kwikasfuki on November 10, 2025, 08:18:52 AM
Quote from: Bluesman on November 08, 2025, 11:57:55 AMThanks guys, appreciate it.
There's a video done by a member of one of  the American forums that I followed. Even then it was a pain with all the bits that you have to take off. 


The space to work in there is very tight
Title: Re: Some info required please..............
Post by: Burchy on November 12, 2025, 02:36:29 PM
When my GTR was due the valve service , my dealer quoted about £1000 .  I waited until a quiet time of the year for them, took off all the panels I could, supplied my own shims and they did it for about £500 in the end.

Replacing the spark plugs is a no-brainer when youve got that far into the engine
Title: Re: Some info required please..............
Post by: Freddy on November 15, 2025, 02:29:26 AM
It ain't no job for a novice - especially if they need adjusting.  Precise measurements are critical - to state the obvious.  More than one owner has been sorry to have gone into it. 
Title: Re: Some info required please..............
Post by: Bluesman on December 09, 2025, 08:17:52 PM
Job completed!! 
All 16 valves were on the tight side, just below bottom limit, to be expected on its first check.  She fired up with no problems. Valves sorted, new air filter, spark plugs. Just brake / clutch fluid and coolant change to go. Thanks for the help and advice.
Title: Re: Some info required please..............
Post by: Burchy on December 11, 2025, 08:40:39 PM
Well done.  That's a big achievement 👏👏
Title: Re: Some info required please..............
Post by: Bluesman on December 12, 2025, 09:54:10 AM
Cheers Burchy  :agree: :mfr_lol:
Title: Re: Some info required please..............
Post by: Bluesman on December 29, 2025, 04:24:03 PM
Major service finished all ready for 2026 .......... :clap:

Valve clearances checked and all adjusted
New air filter
New spark plugs
Rear drive oil change
Engine oil & filter change
Brake fluid changed front & rear
Coolant changed
Clutch fluid changed
Fork oil changed
and 2 new tyres ( Metzler Roadtec 01)
Title: Re: Some info required please..............
Post by: Kwikasfuki on December 30, 2025, 07:02:03 PM
How did you find doing the valve service? How many were out of spec?

Looks like a comprehensive service
Title: Re: Some info required please..............
Post by: Burchy on December 30, 2025, 08:33:33 PM
Did you clean/replace the fuel pump filter?