Kawasaki 1400 GTR

1400 GTR - All Models => 1400GTR Discussion => Topic started by: Kingman on September 27, 2023, 02:23:39 PM

Title: Front discs and pads "4RIDE"...?
Post by: Kingman on September 27, 2023, 02:23:39 PM
Hi guys,

i need to replace the front discs and pads on a 2007 gtr and i got a quote for a 4RIDE set. Has anyone used these discs and pads? If they are junk, I would rather add more money for something better?
Thank you very much for your help!
Title: Re: Front discs and pads "4RIDE"...?
Post by: Boomer on September 27, 2023, 07:48:01 PM
I've never heard of them.
I've always used EBC-HH or SBS-HH pads.
Title: Re: Front discs and pads "4RIDE"...?
Post by: Burchy on September 28, 2023, 11:27:09 AM
Not heard of them either.  I replaced the warped OEM ones with a set of Arashi discs and used SBS pads.  Improved the stopping power appreciably .  I know they are Chinese, but the worked well, did't fade and didn't warp
Title: Re: Front discs and pads "4RIDE"...?
Post by: Kingman on September 28, 2023, 12:38:53 PM
I've read a lot of good things about Arashi discs, but I've never heard of "4RIDE", that's why I asked for help  :punk:
Title: Re: Front discs and pads "4RIDE"...?
Post by: Tynesidebob on September 28, 2023, 11:17:13 PM
It's brakes!
Don't mess about. Fit Brembo's.
They are loose on the bobbins and therefore don't warp.
You can also fit DP Titanium X Race pads. Much higher friction coefficient than hh pads and gentle on discs with a very quick bed in.
Very progressive feel with loads of stopping power.
Title: Re: Front discs and pads "4RIDE"...?
Post by: PK on October 25, 2023, 11:21:33 AM
I replaced front rotors twice in miles 30k with genuine parts and finally changes to Brembo rotors and pads they have been brilliant The main problem I experienced was vibration which I thought was warping through heavy braking I now think it possible that the union on the floating disc may have become clogged with brake dust etc preventing the floating element functioning correctly   
Title: Re: Front discs and pads "4RIDE"...?
Post by: Tynesidebob on October 25, 2023, 09:34:26 PM
The problem with the original discs is that you have to clean out the bobbins between disc and carrier and spin the bobbins EVERY service. It's in the service schedule but no Kawasaki dealer ever does it so they lock solid and warp the discs.
Title: Re: Front discs and pads "4RIDE"...?
Post by: O.C. on October 26, 2023, 05:32:16 AM
Quote from: PK on October 25, 2023, 11:21:33 AMI replaced front rotors twice in miles 30k with genuine parts and finally changes to Brembo rotors and pads they have been brilliant The main problem I experienced was vibration which I thought was warping through heavy braking I now think it possible that the union on the floating disc may have become clogged with brake dust etc preventing the floating element functioning correctly   


This may help  :yes:


https://www.youtube.com/watch?v=r0qGJDgJIHg