I am in the process of restoring my GTR. Strip and repaint of the wheels and rear swing arm inc final drive , I have however been stumped by size of the rear bolt for the diff one bolt that holds the diff onto the swing arm.
Is this a special tool from kwak? I have 28/30/32 ans none are close
Any advice appreciated
Rob
Go to kawasakioriginalparts.com
They have all the parts diagrams for everything Kawasaki.
If the parts list doesn't tell you the size, post the part number on here and we'll have a look for you.
Is this the bigger, lower bolt on the rear of the final drive casing? If so, I believe it's 27mm, accessed from the wheel side.
Just re-read my last post. Meant to say accessed from the outside, under the black cap.
I can confirm, it's defo a 27mm socket
You will need to look it up for your year. For my 2008 I believe it is part
33032-0024SHAFT-SWING ARM,REAR GEAR CASE
https://www.kawasakioriginalparts.com/road-bikes.html?blockref=99912-1486.E-08&machineid=754&year=2008&model=ZG1400A8F&country=GB (https://www.kawasakioriginalparts.com/road-bikes.html?blockref=99912-1486.E-08&machineid=754&year=2008&model=ZG1400A8F&country=GB)
27mm I now believe guys thanks for all the help and advice
Rob