Got a few marks on the bellypan after a few mistakes :undecided: :undecided: does anyone know of an aftermarket belly pan supplier?
Cheers,
Allan
Never heard of seen of one. eBay is probably going to be the answer
Please tell us about the mistakes. :popcorn:
You could try here, there are lots of parts available so you will need to trawl for your requirement
https://www.ebay.co.uk/str/dkmotorcyclespares
Half of it here: -
https://www.ebay.co.uk/itm/Genuine-Kawasaki-GTR-1400-lower-left-side-fairing-cowl-infill-trim-07-08-09-10/264181570996?hash=item3d8272ddb4:g:AkUAAOSwZ-9cWaBl
Oops Wrong version!
Allan
Confirm yours is a facelift 2010 model ?
If so I may have what you need.
Quote from: doebag on November 04, 2019, 04:42:58 PM
Allan
Confirm yours is a facelift 2010 model ?
If so I may have what you need.
Yes, it is the facelift 2010
Quote from: Lonewolf on November 04, 2019, 08:00:04 AM
Please tell us about the mistakes. :popcorn:
Managed to bounce off a TNT truck on the near side last year and this year managed to gentle let it down on the off side after a miss footing (well that's my excuse l9l) :embarrassed: :embarrassed: :laugh:
It happens to the best of us....I had the misfortune of dropping my GSA twice in a day! I can laugh about it now, but at the time I was not a happy chap. :hammer:
Alan
Pictures 1-4 are l/h side. 5-8 are r/h side
All tabs and fasteners are ok, only damage is to the raised rim areas. These would smooth out with some fine sand paper and some 'back to grey'
Quote from: doebag on November 06, 2019, 03:27:54 PM
Alan
Pictures 1-4 are l/h side. 5-8 are r/h side
All tabs and fasteners are ok, only damage is to the raised rim areas. These would smooth out with some fine sand paper and some 'back to grey'
Thanks, my are exactly the same. Thought I might be able to get a replacements or 3rd party carbon fibre.
Quote from: Alfor on November 06, 2019, 08:16:22 PM
Thanks, my are exactly the same. Thought I might be able to get a replacements or 3rd party carbon fibre.
I suspected they might be, never mind I'll give them a clean and stick them on fleabay with some other bits and pieces.
Why don't you clean them up, smooth off the rough edges and get them carbon dipped?
www.wickedcoatings.co.uk
They do a lot of this for Bournemouth Kawasaki with impressive results
Quote from: Burchy on November 07, 2019, 06:34:25 PM
Why don't you clean them up, smooth off the rough edges and get them carbon dipped?
www.wickedcoatings.co.uk
They do a lot of this for Bournemouth Kawasaki with impressive results
Looks good that, will get a price from them - cheers!