Wondering what you guys are using for camera mount as seem a bit stuck where to mount my Drift stealth .
Suggestions would be appreciated .
Well that's quite timely. I had concocted something with a selfie stick and ram ball mounts. If you search here, it (rightly) got much ridicule and in the end it wobbled too much.
I have this weekend purchased a Drift Pivot Mount and stuck it on the top of the black part of the right mirror.
(https://cdn.shopify.com/s/files/1/1018/6167/products/X6gsfvvtTMGdaISekCYi_00.jpg?v=1489855770)
Here's some old country yokel going on about his riding. :smiley: Hopefully someone will find it useful.
https://youtu.be/anjPMTP4WQQ
Hmm, might try that with the GoPro Mike. They have curved sticky bases that might adhere, think I'll put a lanyard on as well for safety.
Drift too have a curved base mount but the mirror arm is neither curved or flat but a mixture of curves. I may add a counter sunk self tapper. I'll keep an eye on the sticky pad. I have a mic lead plugged in, so I wrap part of the lead around the mount and part of it to the ram ball mount between my handlebars. This then acts as a safety wire as well.
Just fitted my GoPro under the mirror, made an aluminium plate up so it went under the mirror mount, took the three star drive screws out of the base and got some that were a bit longer, bolted the plate onto the bottom of the mirror mount and stuck the GoPro adhesive mount to the plate and screwed it as well.
As posted previously regarding camera drift mounts, I have 6 cameras mounted on bike using drift suction cup mounts ( not lost one camera yet ), also clamp mounts. A curved drift mount for helmet camera and my drift stealth camera is shoulder mounted (which I made myself ) that swivels on a ball mount.
Alas, I would post pictures but I keep getting the "image too large" message