Anyone any experience of these?
http://www.ebay.co.uk/itm/191319111870?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true
Strong believer that you get what you pay for, not sure about these! :undecided:
Too cheap to be any good?
not seen those before, personally I would be looking for pegs with a rubber top for extra comfort :yes:
FJR rear pegs fit the GTR :yes: You just have to lose the spring if I remember correctly.
Oh the humanity!
Quote from: Ant on April 24, 2016, 08:46:54 PM
FJR rear pegs fit the GTR :yes: You just have to lose the spring if I remember correctly.
I seem to recall that ER6 (F or N ?) or ZZR pegs also fit....or maybe I've been dreaming again :shocked:
Thanks for suggestions, but are these alternatives all fixed pivot again?
It's just the flexibility of the variation of peg position offered by the rotating arm.
Like the idea for SWMBO, but just the quality (country origin?) of this one that concerns me.
Last thing I need is a peg dropping off through cheap material failure whilst out and about! :undecided:
These are quality, you get what you pay for :yes:
http://www.motorcyclelarry.com/index.php?main_page=product_info&cPath=46_59&products_id=158
Take a look at C10 pillion pegs direct bolt on with or without being lowered. Longer, wider and rubber tops. Wife likes much better over stock C14 pegs.
Quote from: Gscott on April 25, 2016, 01:13:02 PM
Take a look at C10 pillion pegs direct bolt on with or without being lowered. Longer, wider and rubber tops. Wife likes much better over stock C14 pegs.
good tip :clap:
See the new post I put up re uk manufacturing co willing to make the lowering parts for £50 £55 a set posted.
Like the USA version but less
I need 3 orders or more per batch to get em that low
Stoli
just fitted a set of lowering brackets to my bike for the pillion footrests quality products easy to fit and gives a four inches lower footrest mount moved forward by about two inches but the guys in America sent me two sets by accident so I have a spare set if anybody wants them
Quote from: jim cavanagh on May 11, 2016, 01:59:09 AM
just fitted a set of lowering brackets to my bike for the pillion footrests quality products easy to fit and gives a four inches lower footrest mount moved forward by about two inches but the guys in America sent me two sets by accident so I have a spare set if anybody wants them
I picked up a set (like the above) off this site with FJR rests on them.
Result that Cheryl loves them. Far better for the legs and better bracing under braking 👍😃
Quote from: jim cavanagh on May 11, 2016, 01:59:09 AM
just fitted a set of lowering brackets to my bike for the pillion footrests quality products easy to fit and gives a four inches lower footrest mount moved forward by about two inches but the guys in America sent me two sets by accident so I have a spare set if anybody wants them
How much?
£70-00 which covers the cost of the footrests plus the shipping see the video on how easy they are to fit regards jim
£70 for a set you got for free?
Overhead, affects us all...