I am looking for a mount for the sat nav. Not bothered about hardwiring, so looking for something to fit to the bike that I can quickly attach a waterproof zip up cover.
I have seen a perch on ebay, but thought id see what you guys are using to see if anything is better.
Ideas/Pictures/Links are much welcome.
I had the original gtr mount that attaches to the base of your bars, but found it whey too low.
Ive had for a few years the attachement that goes into the centre yolk hole and then ive used a long ram ball mount that raises the satnav up to a position that's good for viewing and does not obscure the clocks
This is a good one..
http://www.ram-mount.co.uk/clutchbrake-ubolt-handlebar-mount-with-1-ball-p-1289-c-281.html
Quote from: Débs on February 21, 2015, 07:37:27 PM
This is a good one..
http://www.ram-mount.co.uk/clutchbrake-ubolt-handlebar-mount-with-1-ball-p-1289-c-281.html
How do they fit as the bars of the Gtr are not round bars ?
Quote from: markmacd on February 21, 2015, 08:02:47 PM
How do they fit as the bars of the Gtr are not round bars ?
They are round Mark... Remove the rear part of the Clutch or Brake res mount bracket and replace it with this mount...
Someone on here has already done it
There is also this one..
http://www.ebay.com/itm/151573172787?redirect=mobile
Quote from: Débs on February 21, 2015, 07:37:27 PM
This is a good one..
http://www.ram-mount.co.uk/clutchbrake-ubolt-handlebar-mount-with-1-ball-p-1289-c-281.html
That's the one I use. For weather proofing I steal a few of the grand kids sandwich baggies to take with me as I don't use a MC specific gps.
Quote from: virginiajim on February 21, 2015, 09:00:51 PM
That's the one I use. For weather proofing I steal a few of the grand kids sandwich baggies to take with me as I don't use a MC specific gps.
You got a pic of it fitted Jim? so Mark can see
Let me check...
Working on getting it off the phone and uploaded to the site.. (bear in mind, I've started my Saturday night drinking festivities...) If it's a little blurry then it's reflecting how I'm seeing it.
In looking at it, the bracket that holds the brake master cylinder is replaced by the ram mount piece. I've got the one with the two balls on it because sometimes I add other stuff...I think.
Actually, this is the one I have...better have two balls than 1 I always say. That way you're prepared.
http://www.ram-mount.co.uk/motorcycle-handlebar-base-with-two-1-balls-p-1286.html
Oh, hell.
Anybody knows how to delete post ? :oops:
I use my Garmin 660 cradle with a RAM mount that attaches to the Helli Bar Risers. I have RAM ball mounts attached to the Clutch and Front Brake assemblies too - not for SatNav as I like it lower down - these are for my SPOT2 Tracker and whatever else I might want to attach like my Drift Ghost camera.
(http://i1259.photobucket.com/albums/ii552/AdventureVagabond/Tessie%20GTR1400/risers_zpsd2412587.jpg)
(http://i1259.photobucket.com/albums/ii552/AdventureVagabond/Tessie%20GTR1400/AFE4B43B-473E-465A-A129-6EAC07994456_zpsf9hrzj6c.jpg)
(http://i1259.photobucket.com/albums/ii552/AdventureVagabond/Tessie%20GTR1400/1301B0CE-DE5B-4EC6-B5AC-CEE589BF4F4A-1469-0000039B2E466FFD_zps825e9377.jpg)
I was thinking of one of these ..... http://www.motorcyclelarry.com/index.php?main_page=product_info&cPath=46_59&products_id=186&zenid=59odo6qoredgqb810i69jelmq5
Darn it ... How to you post a link?
Quote from: Dai Version on February 24, 2015, 11:36:49 AM
Darn it ... How to you post a link?
What like this:
RAM BALL RESERVOIR COVER (http://www.motorcyclelarry.com/index.php?main_page=product_info&cPath=46_59&products_id=186&zenid=59odo6qoredgqb810i69jelmq5)
Quote from: Stephen.Stallebrass on February 24, 2015, 12:16:43 PM
What like this:
RAM BALL RESERVOIR COVER (http://www.motorcyclelarry.com/index.php?main_page=product_info&cPath=46_59&products_id=186&zenid=59odo6qoredgqb810i69jelmq5)
That's what I have on both reservoirs. :banana:
Quote from: Stephen.Stallebrass on February 24, 2015, 12:16:43 PM
What like this:
RAM BALL RESERVOIR COVER (http://www.motorcyclelarry.com/index.php?main_page=product_info&cPath=46_59&products_id=186&zenid=59odo6qoredgqb810i69jelmq5)
Yes ... Like that..... How'd you add it as a link not just paste the code/address letters?
1. Type the text you want
2. Highlight it.
3. Click the insert hyperlink icon above. (http://www.gtr1400.co.uk/forums/Themes/default/images/bbc/url.gif)
[url]text[/url]
4. After the "url" but before the closed square bracket add an equal sign then paste in the link ("=link"), like this:
[url=link]text[/url]
5. For example:
[url=http://www.gtr1400.co.uk/]Kawasaki 1400 GTR Forum[/url]
6. The above turns into this when you post:
Kawasaki 1400 GTR Forum (http://www.gtr1400.co.uk/)
At least that's how I do it.