I don't realy want to strip the panel's off the bike to wire it up,is there an easy to get to connector to enable me to do this,i'm even contemplating letting someone who know's what there doing do it for me,at the end of the day it's only 2 wire's,hardly rocket science I know,dont want to bodge installing it.
Don't be such a wuss. :mfr_lol:
Screen off.... Left hand upper cover off... Accessory wires inside the rubber boot. Easy Peasy. :mfr_lol:
OR bring it to Bournemouth and I will do it for free... :mfr_lol:
:popcorn:
Or take the black side infill panel off and connect into the aux leads you will need to take centre cover off the tank also.
Quote from: Débs on August 13, 2014, 06:25:56 PM
Don't be such a wuss. :mfr_lol:
Screen off.... Left hand upper cover off... Accessory wires inside the rubber boot. Easy Peasy. :mfr_lol:
OR bring it to Bournemouth and I will do it for free... :mfr_lol:
:popcorn:
Hi debs.
Your the expert how easy is it to get the panels off a 2008/9 mine is the one with the storage on the tank :wacko: :ohplease:
It's a piece of piss, that's how easy it is!
you could use a scotch block/pozi tap connected to your side light bulb feed , you can get to this from under the headlight part of the fairing
Quote from: The Wolf on August 13, 2014, 07:55:56 PM
It's a piece of piss, that's how easy it is!
What is Mr wolf wiring or removing panels :mfr_lol:
Quote from: Zebedee on August 13, 2014, 06:30:25 PM
Or take the black side infill panel off and connect into the aux leads you will need to take centre cover off the tank also.
You don't have to take the centre cover off the tank on the 2010+ models to get the side infill panel off.
I don't.. :mfr_lol:
Quote from: pross on August 13, 2014, 07:30:10 PM
Hi debs.
Your the expert how easy is it to get the panels off a 2008/9 mine is the one with the storage on the tank :wacko: :ohplease:
Still very easy to do. :popcorn:
Quote from: pross on August 13, 2014, 10:55:51 PM
What is Mr wolf wiring or removing panels :mfr_lol:
The whole job, panel removal and electrical connection even if you dawdle shouldn't take you more than 30 minutes.
Quote from: Débs on August 13, 2014, 06:25:56 PM
Don't be such a wuss. :mfr_lol:
Screen off.... Left hand upper cover off... Accessory wires inside the rubber boot. Easy Peasy. :mfr_lol:
OR bring it to Bournemouth and I will do it for free... :mfr_lol:
:popcorn:
Well said Deb's - Even I managed it on my own - but Deb's is excellent company if you fancy a Bournemouth trip....
Quote from: The Wolf on August 14, 2014, 12:59:38 AM
The whole job, panel removal and electrical connection even if you dawdle shouldn't take you more than 30 minutes.
Anyone showing how to remove them on here ?. :ohplease:
Piglet wire from the front brake light switch. No panels to remove and a five minute job
Quote from: Débs on August 13, 2014, 11:56:30 PM
You don't have to take the centre cover off the tank on the 2010+ models to get the side infill panel off.
I don't.. :mfr_lol:
Really will have to look into this as would make my life easier :)
Quote from: pross on August 14, 2014, 08:59:41 AM
Anyone showing how to remove them on here ?. :ohplease:
This guy is doing an Air Filter change but he shows how to take the top infill off.. I suggest removing the screen although this guy don't.
Start at 5:25 to 15:12.
There is an allen bolt in the bottom of the box that needs to be removed which he don't mention.
http://youtu.be/QxDiqMcEaQU
all wired in & up & running,i ordered another mount for my xjr1300,so i can use the garmin 660 on both bike's,i used a short arm ram mount fitted to the clutch lever bracket on the handlebars.it's open to the element's on the xjr,at least on the GTR it's more protected,are these shower proof or actually waterproof,i.e. if it poured down will it harm it.
The BMW version of the Garmin 660 (Navigator 1V is certainly fully waterproof and advertised as such - not sure about the 660 itself?
To the best of my knowledge and from personal experience the Zumo 660 is absolutely 100% perfectly waterproof.
Quote from: flatfour on August 21, 2014, 09:18:15 AM
The BMW version of the Garmin 660 (Navigator 1V is certainly fully waterproof and advertised as such - not sure about the 660 itself?
Agree :):):)
The Garmin 660 is a motorcycle specific device and as such is waterproof....mine has covered many thousands of miles in all weathers on several bikes and has never suffered from water ingress despite being thoroughly soaked on more than one occasion :yes:
On my current Super Tenere
(http://i336.photobucket.com/albums/n326/oldeconey/2014-06-16092255_zpsba1ef9a8.jpg) (http://s336.photobucket.com/user/oldeconey/media/2014-06-16092255_zpsba1ef9a8.jpg.html)
On my previous Versys 1000
(http://i336.photobucket.com/albums/n326/oldeconey/Versysfittedwithaccessories006_zpsaf58e09c.jpg) (http://s336.photobucket.com/user/oldeconey/media/Versysfittedwithaccessories006_zpsaf58e09c.jpg.html)
Seen here on my GTR
(http://i336.photobucket.com/albums/n326/oldeconey/Garmin002_zps0ae15b38.jpg) (http://s336.photobucket.com/user/oldeconey/media/Garmin002_zps0ae15b38.jpg.html)