Forgive me if this topic or a similar one has arisen in the past. I flicked through a few posts but not quite what I was looking for.
Thinking of replacing indicator bulbs with LEDs. If I do, what is the fitting type? and would I need to swap the standard relay for an LED one (some bikes you need to do this but don't know about GTR)?
Cheers
Yes, you'll need a led relay to prevent extra fast flashing. You need an offset pin lamp with equal height pins
Sent from my GT-I9300 using Tapatalk
Hi
You can get flasher relays that will work with normal or LED bulbs, or any mixture of bulbs.
They don't look any more expensive.
If the flasher relay is designed for LED only should a normal bulb be fitted in an emergency or whatever the relay will burn out.
Richard
Quote from: stig414 on February 20, 2014, 06:38:54 PM
Yes, you'll need a led relay to prevent extra fast flashing. You need an offset pin lamp with equal height pins
Sent from my GT-I9300 using Tapatalk
Any ideas what the code/type is?
No idea but the relay is under the seat.
The pic in the Service Manual on page 16-12 shows exactly where it is (#32).
Its just plug and play. Only thing which you need to confirm: is it 2 or 3 pin. Disconnect original and plug in one for LED. There are plenty of sellers on the e-bay and they don't cost much.
There are only two models: 2 and 3 pin :smiley:
In example:
http://www.ebay.com/itm/12V-2-Pin-Motorcycle-Motorbike-Universal-LED-Turn-Signal-Indicator-Flasher-Relay-/251222482090?pt=Motorcycles_Parts_Accessories&hash=item3a7e06dcaa&vxp=mtr
http://www.ebay.com/itm/Electronic-LED-Turn-Signals-Relay-Fix-Flasher-Blinker-/150619347919?pt=Motorcycles_Parts_Accessories&hash=item23119cdbcf&vxp=mtr
Cheers
Gordan
Super! Thanks folks! :yes:
Hi
I bought and have just fitted these, work well and look nice and bright
http://www.ebay.co.uk/itm/321321949969?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.co.uk/itm/360362105573?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Richard