75mm stainless steel bolts £ 5 delivered
8mm steel spacers £15 delivered
this set up will lift the bars to 48mm ( same as most bar risers) you can take out spacers to reduce height, this set up is rock solid as SS bolts are very strong and the spacers are a good grade steel, they are for axles on derby roller skates. Its just a mock up for a round the block trial before I start to fab my own spacers from some block aluminium I picked up for about fiver each
(http://i55.photobucket.com/albums/g133/neill1200/Bike/DSCF0003_zps69297c31.jpg)
(http://i55.photobucket.com/albums/g133/neill1200/Bike/DSCF0001_zps8dfb2ace.jpg)
(http://i55.photobucket.com/albums/g133/neill1200/Bike/DSCF0004_zpsc24a0fb1.jpg)
You cunning little monkey. :smartass:
I had a laugh at the picture showing all the spacers though...but that's a bloody good idea :clap:
I assume all the cables etc can stand the extra stretch? :cool:
cables will stretch to 50mm no probs. the brake/clutch line is joined by a block that is bolted to the triple tree, you will need to undo this so the line can stretch up , the block is left dangling so needs to be tidyied up. if I ever change my lines to braided I will make this just one piece of brake line
:cool:
This is my solution col raiser of 15mm, 20mm. 30mm.
Above 20mm. riser must be moved compensators clutch and brake fluid.
(http://i44.tinypic.com/ml6q8n.jpg)
MG valerio. :popcorn: