Print Page - what goes where

Title: what goes where
Post by: nightrider on May 27, 2013, 08:35:58 PM

putting the rear wheel back in . one big washer on at the nut end does the other one go on at the other end or should it be somewhere else, thanks garry

Title: Re: what goes where
Post by: O.C. on May 27, 2013, 08:54:58 PM

This may help, its a PDF.. you need section 10-2

http://dl.dropboxusercontent.com/u/6598691/GTR1400-share/GTR1400-workshop-manual.pdf

Title: Re: what goes where
Post by: Richard on May 27, 2013, 09:10:52 PM

Hi

Does this help

http://www.kawasakioriginalparts.com/kawasaki_motorcycle_parts_selection_pfk.php?block_01=F2240&block_02=99912-1648&block_03=mc&year01=2010&ca=GB

Richard

Title: Re: what goes where
Post by: nightrider on May 27, 2013, 09:51:32 PM

it only shows one washer which goes on before the big nut . the other end of the axel bar does not show a washer , but I have 2 washers , where has the other one come from the only place I can see it could go is on the other end of the axel .

Title: Re: what goes where
Post by: nightrider on May 27, 2013, 10:13:24 PM

after finding some more pictures to look at , I am sure it goes on the axel on the left side , looked at the pictures on the cornwall Kawasaki parts site and it shows only one washer. which is the one on the nut end,

Title: Re: what goes where
Post by: Deon on May 28, 2013, 05:43:08 AM

There is a washer that goes on the left hand side. Refer 10-8 in owners manual ( well, the electronic version of the owners manual that I have anyway ).

Deon

Kawasaki 1400 GTR

1400 GTR - All Models => 1400GTR Discussion => Topic started by: nightrider on May 27, 2013, 08:35:58 PM