I have bought myself a Drift Ghost Camera...
Wasn't sure where to mount it. I would like it on top of my helmet but am waiting for a ball head bracket to come. In the mean time Ive put it on the clutch res ball mount.. Ive not used it yet but will on the way to France on Wednesday.. :banana:
Also posted a few pics of my extra lights at the rear incase no one has seen them yet.. :banana:
Are the red lights wired into your brake lights or simply standard rear reds?
Are the yellow lights wired into the indicators or just reflectors?
Thanks
Alan
Quote from: BigAlan on May 26, 2013, 03:03:07 PM
Are the red lights wired into your brake lights or simply standard rear reds?
Are the yellow lights wired into the indicators or just reflectors?
Thanks
Alan
They are all wired in.. Tail lights and indicators.. :yes:
Well impressed matey. Make sure you get some vid of France on here when you get back. :banana:
Quote from: Rossendale Rider on May 26, 2013, 07:37:16 PM
Well impressed matey. Make sure you get some vid of France on here when you get back. :banana:
Matey? :ohplease: :nono: :mfr_lol: :mfr_lol: :popcorn:
Quote from: Debs on May 26, 2013, 07:42:47 PM
Matey? :ohplease: :nono: :mfr_lol: :mfr_lol: :popcorn:
Apologies Debs. Picked it up when I was last in Pompey. Or splashing around in a bubble bath - can't remember which!
Quote from: Rossendale Rider on May 26, 2013, 08:32:18 PM
Or splashing around in a bubble bath
That took me right back to my childhood........Matey = Bubble bath. :wink:
I like how you have mounted the camera, is that something you've created yourself?
Quote from: Debs on May 26, 2013, 03:43:44 PM
They are all wired in.. Tail lights and indicators.. :yes:
Deb's - looks good. How have you made the wiring connections?
Are the panniers still easily removed?
Nice job Debs....don't forget the Windowlene for your screen and Matey bubble Bath :mfr_lol: :mfr_lol:
Quote from: Lonewolf on May 27, 2013, 03:25:47 AM
I like how you have mounted the camera, is that something you've created yourself?
No Steve its not.. I already had the bits laying around.
Quote from: PCPeteUK on May 27, 2013, 08:09:00 AM
Deb's - looks good. How have you made the wiring connections?
Are the panniers still easily removed?
Yes Pete they are... I have connected the wiring via boat connections as they are waterproof then covered with heat shrink so they dont look to obvious.. They can still be unscrewed easily.. :banana:
3 pins... 1 earth and the other 2 for tail lights & indicators.. I will show you next time you're down here..
debs, that camera looks good, can you give us the numbers on this , what made you get this v the gopro?
what record time can you get for which memory card? does it auto rewrite, can it continuely record ?
Id love a camera that i can just leave running so i always have the last 20 mins of footage
Quote from: viper on May 27, 2013, 03:55:10 PM
debs, that camera looks good, can you give us the numbers on this , what made you get this v the gopro?
what record time can you get for which memory card? does it auto rewrite, can it continuely record ?
Id love a camera that i can just leave running so i always have the last 20 mins of footage
I never liked the look of the GoPro...
The place I bought mine gives a 10% discount plus a free 32GB Memory card.. It also does loop recording. That was the one thing I really wanted..
The battery life is also 3 hours but can also wire it in or run off an extra power pack. :banana:
More info here:- http://driftinnovation.com/camera/drift-hd-ghost/
Buy here: http://www.actioncameras.co.uk/brands/drift/cameras
Discount code is "CRAFTY10"
Total cost £270
Watch review on youtube: http://youtu.be/OTmagM5XE0M
Debs
does the ram mount have a threaded section that screws into the drift mount?
P
Quote from: patrick on May 27, 2013, 08:22:30 PM
Debs
does the ram mount have a threaded section that screws into the drift mount?
P
I used the flat mounting pad that comes with the camera and stuck it to the Ram Mount.
Quote from: Debs on May 27, 2013, 12:59:57 PM
Yes Pete they are... I have connected the wiring via boat connections as they are waterproof then covered with heat shrink so they dont look to obvious.. They can still be unscrewed easily.. :banana:
3 pins... 1 earth and the other 2 for tail lights & indicators.. I will show you next time you're down here..
Thanks Deb's innovative as always :smiley:
Quote from: PCPeteUK on May 28, 2013, 08:46:42 PM
Thanks Deb's innovative as always :smiley:
:agree: :mfr_lol: :mfr_lol:
Quote from: Debs on May 30, 2013, 05:50:19 PM
:agree: :mfr_lol: :mfr_lol:
modest too :yes: :mfr_lol:
Quote from: olde coney on May 30, 2013, 07:06:26 PM
modest too :yes: :mfr_lol:
:agree: :whistling: :mfr_lol: :popcorn: