I have that sticky clear plastic on the tops of my panniers, i want to cut some to shape and put on the side of the tank but try as i can i cant find any on ebay or i am not typing the correct words, anybody got an idea where i can get some?
Thanks
Alan
Only a week to go before Euro trip, France, Belgium, Holland and Germany.
I got mine from here http://www.protectivecarfilm.co.uk/ he's a nice bloke and will tell you exactly how to fit it..in detail ... fer ages.. bless 'im :yawn:
I just got a big sheet of the stuff, and have used it all over the bike, me laptop, kindle, mobby screen, stuff is dead usefull :gunsmilie:
Anyone know of any fitters in the north?
really tis not hard to fit...if i can do it anyone can :gunsmilie: but if you want a prof installer, you can search here http://www.3mventureshield.co.uk/paint-protection-film/
I bought the Ventureshield kit for under £100 fror the ZZR and it came with a black block to smooth the plastic with and a bottle which has a drop of baby shampoo in, you fill the bottle with water and spray the surface and plastic, then squeegee with the block and "stretch" the film to fit.
In two years it stayed in place and was great. The kit came on a sheet with pre-cut sections you use for each designated panel. there is a website and instruction clips.
I am a politician when it comes to anything vaguely mechanical/electrical/technical ie. you can't believe anything I've done!! So if it was in any way complicated I would have failed to fit it.
Ventureshield - read the instructionms carefully first and away you go, if you aren't happy with a panel, it lifts off easily and you start again, then leave to dry and it's done.
Sounds Brill :cool:
My experience of protective film was thus, I bought the full venture film kit and fitted it ok, got the hang of it after the first piece or two. I later wanted to add some extra bits a got some cheaper full sheets off ebay, that stuff is not very pliable and does not like curves even when heated with a HDryer. I got some stuff a bit dearer and it was just as difficult on the curves. An installer told me thats unless its genuine film made by 3M , then it wont stretch. and there is loads of film claiming to be 3M thats is not, conclusion if its cheap it wont bend.
I think Mr Viper has it ... for this sort of cosmetic work it HAS to be best practice to spend a bit more and get stuff then bends and stretches ... otherwise you are wasting your money and the job will be foooked :no: !!
Absolutely Rusty...........I won't stint on the next boob job for SWMBO :mfr_lol:
Ever felt a right.........
Go to your local sign writer shop and ask them for some clear film with minimum 10 year guarantee and while you are there i bet they will fit it too.
The biggest tit in my last marriage was.
me :wacko:
If your problem is that the tank and fairing are being marked by you knees, I solved this problem by fitting two sets of genuine K tank protectors, one set in the usual position of your knees, and the other set on the fairing where my long legs were still chafing on the paintwork, worked a treat on mine. :yes: