i've just ordered a fenda extenda for my new gtr1400,i'm gonna order a beowulf rad guard,are these easy to fit,can they be fitted without stripping the bike down.
both the rad cover and fenda extenda are very easy to fit. I've got both fitted to the gtr and the zzr :smiley: but best to remove your mudgaurd thou! the fenda extenda needs to be secured by 4 little self tapper screws, I only used 3 screws thou..! or it will come off faster than it went on :laugh: just remember when you remove the brake line hose's from the gaurd, which are the plastic push in type, put your fingers behind them and squeeze the 2 ends ends together, then they will pop out! don't try to pull them out without squeezing the 2 parts together, because they will break. also make sure you hold the fenda extenda firmly in place when you drill the holes through both the extenda and mudgaurd using the correct size drill!.. The rad gaurd is very easy to fit, nothink needs removing. it just clips over the top of the rad and secures at the bottom "just off centre" by bolt and nut that's already in place :smiley:
Quote from: 2kwacks on March 26, 2012, 05:24:04 PM
b just remember when you remove the brake line hose's from the gaurd, which are the plastic push in type, put your fingers behind them and squeeze the 2 ends ends together, then they will pop out! don't try to pull them out without squeezing the 2 parts together, because they will break.
:oops:.... as i found out!!! :mfr_lol:
thank's for the info guy's,wanna get that rad protected as soon as the beast arrive's. :mfr_lol: