Unless stated, all the suppliers listed here are European based.
Crash bars/protectors/Engine Guards:
AC LRP - http://ac-caravans.co.uk/ac-lrp.html (http://ac-caravans.co.uk/ac-lrp.html)
R&G - http://www.rg-racing.com/ (http://www.rg-racing.com/)
R&G Adventure bars for 2010 models http://www.rg-racing.com/browseBike/Kawasaki/GTR1400_Concours/2010/AB0002BK.aspx (http://www.rg-racing.com/browseBike/Kawasaki/GTR1400_Concours/2010/AB0002BK.aspx)
Kawsaki - No longer on Kawasaki site, but available from eBay
TopBlock crash protection - www.top-block.com (http://www.top-block.com)
Jaybeebikerbits - http://www.jaybeebikerbits.co.uk/ (http://www.jaybeebikerbits.co.uk/)
Bar ends:
HVMP (USA)- http://www.hvmp.com (http://www.hvmp.com/kawasaki.htm)
Daytime running lights (DRL):
Bikevis - http://www.bikevis.com (http://www.bikevis.com)
Deflectors:
MIT Tuning - http://www.mittuning.fr/sommaire_Kawasaki/accessoires_1400_GTR/deflecteur_1400_GTR/deflecteur_1400_gtr.html (http://www.mittuning.fr/sommaire_Kawasaki/accessoires_1400_GTR/deflecteur_1400_GTR/deflecteur_1400_gtr.html)
Baker (USA)- http://www.bakerbuilt.com/bbairwings/concours.html (http://www.bakerbuilt.com/bbairwings/concours.html)
Motax - http://www.motax.fr/sommaire_Kawasaki/accessoires_1400_GTR/1400_GTR__deflecteurs/1400_gtr__deflecteurs.html (http://www.motax.fr/sommaire_Kawasaki/accessoires_1400_GTR/1400_GTR__deflecteurs/1400_gtr__deflecteurs.html)
Electrical
Fuzeblock - http://www.nippynormans.com/products/f650stcsgsdakar/item/fuzeblock-switchable-fuse-panel-fuz-fz1 (http://www.nippynormans.com/products/f650stcsgsdakar/item/fuzeblock-switchable-fuse-panel-fuz-fz1)
USB charging - http://www.amazon.co.uk/dp/B00CDOBMDU/ref=pe_385721_37038051_pe_217191_31005151_3p_M3T1_dp_1 (http://www.amazon.co.uk/dp/B00CDOBMDU/ref=pe_385721_37038051_pe_217191_31005151_3p_M3T1_dp_1)
Exhausts:
Beowulf - http://www.beowulf-performance-products.com (http://www.beowulf-performance-products.com)
BOS - http://www.bos-exhausts.com/cat/0710614-eng.html (http://www.bos-exhausts.com/cat/0710614-eng.html)
Devil - http://www.devil-exhaust.com/KAWASAKI~1400%20GTR~2007-%2408.street-scooter.exhaust (http://www.devil-exhaust.com/KAWASAKI%7E1400%20GTR%7E2007-%2408.street-scooter.exhaust)
Leo Vince (USA) - http://www.leovinceusa.com/cart/search.php?Model=GTR%201400&Make=KAWASAKI&Year=2009 (http://www.leovinceusa.com/cart/search.php?Model=GTR%201400&Make=KAWASAKI&Year=2009)
Area P (USA) - http://www.areapnolimits.com/products/Slip-On-Exhaust-Kawasaki-Concours-14-2008.php (http://www.areapnolimits.com/products/Slip-On-Exhaust-Kawasaki-Concours-14-2008.php)
Vance & Hines CS1 Black (USA) - http://www.morepoweracing.com/search.asp?strKeywords=43511&submit=%BB (http://www.morepoweracing.com/search.asp?strKeywords=43511&submit=%BB)
Xtreme stainless - http://www.xtremestainless.co.uk/shop/Kawasaki/GTR_1400 (http://www.xtremestainless.co.uk/shop/Kawasaki/GTR_1400)
Huggers and Guards:
Skidmarx extenda fender - http://www.skidmarx.co.uk/section/mudguards/extenda_fendas/kawasaki.html (http://www.skidmarx.co.uk/section/mudguards/extenda_fendas/kawasaki.html)
Skidmarx hugger - http://www.skidmarx.co.uk/section/mudguards/rear_huggers/kawasaki.html (http://www.skidmarx.co.uk/section/mudguards/rear_huggers/kawasaki.html)
Pyramid plastics - http://www.pyramid-plastics.co.uk/catalog/index.php?cPath=58_1191&osCsid=c87f68b04ba6ad14aaa34d79450e3c58 (http://www.pyramid-plastics.co.uk/catalog/index.php?cPath=58_1191&osCsid=c87f68b04ba6ad14aaa34d79450e3c58)
Motax - http://www.motax.fr/sommaire_Kawasaki/accessoires_1400_GTR/1400_GTR_garde-boue_ar__/1400_gtr_garde-boue_ar__.html (http://www.motax.fr/sommaire_Kawasaki/accessoires_1400_GTR/1400_GTR_garde-boue_ar__/1400_gtr_garde-boue_ar__.html)
Lighting
Wig wam (alternate flashing headlights) - http://www.sportouring.com/gallery.php?sectionHeaderActive=400&rangeChoosen=14 (http://www.sportouring.com/gallery.php?sectionHeaderActive=400&rangeChoosen=14)
Lowering kits
Lower foot pegs - www.projektd.com (http://www.projektd.com) (Far east)
Mounts
Techmount - http://www.buybits.com/product/sku_7613.aspx (http://www.buybits.com/product/sku_7613.aspx)
Ram Mount - http://www.telferizer.com/products/ (http://www.telferizer.com/prods.html#kawasaki)
Radiator Guards
R&G - http://www.rg-racing.com/browseBike/Kawasaki/GTR1400_Concours/2008.aspx (http://www.rg-racing.com/browseBike/Kawasaki/GTR1400_Concours/2008.aspx)
Beowulf - http://www.beowulf-performance-products.com/ (http://www.beowulf-performance-products.com/)
Projektd - http://projektd.com/product_info.php?cPath=27_39_47&products_id=62 (http://projektd.com/product_info.php?cPath=27_39_47&products_id=62)
Tank pads:
Kawasaki - http://www.kawasaki.co.uk (http://www.kawasaki.co.uk)
TechSpec - http://www.speedycom.co.uk/shop/product.php?productid=18809&cat=0&page=1 (http://www.speedycom.co.uk/shop/product.php?productid=18809&cat=0&page=1)
Seats:
Kawasaki lower GEL seat (http://www.kawasaki.co.uk/product.asp?Id=340E4DCABBC&Sub=5&SId=3404BECEEE0). Reduces height by approx 1".
Sargent GTR1400 seat (http://www.sargentcycle.co.uk/acatalog/gtr1400.html). You can also get a heated version.
Topesellerie (http://www.topsellerie.co.uk/KAWASAKI-GTR-1400-seats-petrol-tank-covers-tank-bags-motorbike_6_451.html). Do Gel and heated.
Corbin (USA) seats (http://www.corbin.com/kawasaki/concours.shtml) (US only). Corbin also do a backrest.
There's also some custom seat makers you can try in the UK.
Digger seats (http://www.diggerseats.co.uk/) based in Newport.
Tony Archer (http://tonyarcher.co.uk/) based in Huddersfield near the UCI Cinema. He's been in the industry for years and does an excellent job.
Screens
Kawasaki high screen - http://www.kawasaki.co.uk/product.asp?Id=340E4DCABBC&S=6543773 (http://www.kawasaki.co.uk/product.asp?Id=340E4DCABBC&S=6543773)
Calsci screen - http://shop.heroblobs.co.uk/collections/kawasaki-gtr1400/products/calsci-screens-for-kawasaki-gtr1400 (http://shop.heroblobs.co.uk/collections/kawasaki-gtr1400/products/calsci-screens-for-kawasaki-gtr1400)
Laminar lip pre 2010 - http://shop.heroblobs.co.uk/collections/kawasaki-gtr1400/products/laminar-lip-for-kawasaki-gtr1400 (http://shop.heroblobs.co.uk/collections/kawasaki-gtr1400/products/laminar-lip-for-kawasaki-gtr1400)
Laminar lip post 2010 - http://shop.heroblobs.co.uk/collections/kawasaki-gtr1400/products/laminar-lip-for-kawasaki-gtr1400-with-tall-screen (http://shop.heroblobs.co.uk/collections/kawasaki-gtr1400/products/laminar-lip-for-kawasaki-gtr1400-with-tall-screen)
Cee Baileys pre 2010 - http://www.sportouring.com/gallery.php?sectionHeaderActive=200&rangeChoosen=273 (http://www.sportouring.com/gallery.php?sectionHeaderActive=200&rangeChoosen=273)
Ceel Baileys post 2010 - http://www.sportouring.com/gallery.php?sectionHeaderActive=200&rangeChoosen=540 (http://www.sportouring.com/gallery.php?sectionHeaderActive=200&rangeChoosen=540)
Ermax pre 2010 - http://www.ermaxuk.co.uk/pages3/dbb.php?code=217&flag=1 (http://www.ermaxuk.co.uk/pages3/dbb.php?code=217&flag=1)
Skid Marx pre 2010- http://www.skidmarx.co.uk/section/screens/screens_headlight_covers/kawasaki.html (http://www.skidmarx.co.uk/section/screens/screens_headlight_covers/kawasaki.html)
MRA Vario 2007 on - http://www.bikehps.com/acatalog/Vario_Touring_Screens_for_Kawasaki.html#a52123 (http://www.bikehps.com/acatalog/Vario_Touring_Screens_for_Kawasaki.html#a52123)
Suspension
Hyperpro progressive spring - http://www.hyperpro.com (http://www.hyperpro.com)
What about a decent hugger, I cant see any links for them. Anybody got one and can recommend a particular brand?
If there's one thing I do want its a hugger ;D
Bear with me, will update it again tonight. Skidmax do huggers
Ta!
Added huggers. Still a ton of stuff to add
Huggers ???
Try putting " Mudsling " into Google ... i am pretty sure that's the name... I know they do very sturdy and decent huggers for BMW R1200's and would imagine any make would be catered for... give it a go !
Looks like mudsling are for BMW only. I'd go for a carbon hugger.
I did give my bike its six month clean on Sunday and was grateful for the hugger. Little dirt and no rust
What about exhausts? The potato launcher has to go.
Gotta admit, I like the standard exhaust. If you ever decide to sell it let me know, could be interested if its pretty cheap ;D
What exhaust have you currently got?
I've pit a remus on mine. The soul of the bike is back
Ive still got the original exhaust on the bike, but it never hurts to have a spare just in case you drop the bike as they are like rockin horse poo to find second hand .
So I've seen the Leo Vance and BeoWulf on eBay. There's also the Two Bros and Remus on my short list.
Does anyone have a view as to which is the easiest to install? I'm not interested in getting a power commander to put on and a remapping done which I understand the Two Bros requires.
The Beowulf exhausts are guaranteed to fit without any hassle. They are based in Halifax not a million miles from where I work.
However I once bought a radiator cover for a bike from them and it wasn't even close to fitting. I took the bike in and they were quite suprised when it was way too big. As a gesture of goodwill they used my bike to measure one up and then gave me a new cover for free. They are very helpful, give them a ring I'm sure they will sort you something out.
I have the Remus Hexacone and that is a doddle to fit as well. It gives a nice, deep, throaty sound. At some point I intend to remove the bafler.
Added MRA Vario screen.
Tempted to buy it myself. As much as I love the Ultra Tour, what I don't like is
1. It removes downwards pressure from the front wheel when raised
2. Annoys my vision when filtering so I always have to lower it
Added Hugger and deflectors from Motax
Added Radiator Guards
;D You must have an extremely understanding wife!
Quote from: Lonewolf on October 16, 2010, 07:58:26 PM
;D You must have an extremely understanding wife!
?
sorry, don't quite follow?
Doh! Ignore me. I thought you meant you had added them to the bike but now I realise you mean you have added them to the list, stupid me. Its been a long day!! :-[ :-[
Ah, no, not added them to the bike - yet
I have so much stuff to do on the bike just piling up. The missus insisted today was family day!
:) You have to dedicate at least one day a year to the family thats only fair ;D
Are there any UK distos for the Motax deflectors?
http://www.motax.fr/sommaire_Kawasaki/accessoires_1400_GTR/1400_GTR__deflecteurs/1400_gtr__deflecteurs.html
Cheers
Quote from: Nygie on December 15, 2010, 07:32:16 AM
Are there any UK distos for the Motax deflectors?
http://www.motax.fr/sommaire_Kawasaki/accessoires_1400_GTR/1400_GTR__deflecteurs/1400_gtr__deflecteurs.html
Cheers
No, buy from http://www.mittuning.fr/sommaire_Kawasaki/accessoires_1400_GTR/deflecteur_1400_GTR/deflecteur_1400_gtr.html instead
Much cheaper
Cheers Norm
can any one recommend a tank bag system for the 2010 there are clips for a tank bag to connect to allready on the tank, and I understand you buy a bracket for the petrol cap as a extra fastener! have tried the bagster tank cover but it was a really bad fit, so just checking what else is available, so if you have a tank bag fitted and are happy with the system please spill the beans and send some links so I can check them out!
http://www.ceebaileys.com/bags/kawa_bags.html
I have fitted Cruise Control from Murphs Kits in the US
Audiovox CCS
Piastra per tutti i bauletti GIVI MONOLOK da 46 LITRI in poi.
Mia produzione.
(http://img14.imageshack.us/img14/7853/immag0141.jpg) (http://img14.imageshack.us/i/immag0141.jpg/)
MGvalerio. ;D
GTR 1400 ABS motorcycle with CD radio with 4 speakers, there is everything but can not see anything.
"http://www.youtube.com/embed/_O0i638J6-g"
I found screen on my new 2010 model a bit short even at running in speeds. I've received screen but not fitted yet. What tools do I need?
Incidentally I've also got a Beowolf radiator guard. Only held on by one bolt at top and doesn't look a 100% fit / secure at bottom. Not fallen of though :-)
I think its a 4 and a 5 mm hex.
Use the 4 mm to remove the four bolts.
Remove the plastic coverings
Remove the two bolts with the 5 mm hex
Refitting is reverse
Just to expand on the above, when you are refitting the plastic covers on your screen, do not over tighten the four bolts otherwise you will get tiny cracks in the covers, I know this because I did it unfortunately. The covers are only made of plastic and are quite weak.
Good point LW. The same applies to the two 5mm bolts in which case you might crack your screen
I've not updated the first page on this thread for a while. Is there anything anyone would like added?
Remus exhaust
TopBlock crash protection - www.top-block.com
Lower foot pegs - www.projektd.com
Got a hyperpro progressive spring fitted on the standard rear shock to my 2009 GTR.
www.hyperpro.com
Vance & Hines CS1 Black + VAT
http://www.morepoweracing.com/search.asp?strKeywords=43511&submit=%BB
http://www.telferizer.com/prods.html
Cheers, added the ones mentioned above
Does anyone have any handlebar risers for sale, that will fit my 57 plate GTR. Or know where i can find some?
As i posted earlier, i have a set for a 2008+, that do not fit my bike.
So i have for sale or p/ex a set of risers, if anyone is interested.
Cheers B/F
Have you considered getting some fabricated to spec as a one off for yourself?
Quote from: Black Flash on May 13, 2011, 04:57:49 PM
Does anyone have any handlebar risers for sale, that will fit my 57 plate GTR. Or know where i can find some?
As i posted earlier, i have a set for a 2008+, that do not fit my bike.
So i have for sale or p/ex a set of risers, if anyone is interested.
Cheers B/F
BF, you might be best posting your request in the forum: http://www.gtr1400.co.uk/forums/index.php/board,3.0.html
Quote from: Black Flash on May 13, 2011, 04:57:49 PM
Does anyone have any handlebar risers for sale, that will fit my 57 plate GTR. Or know where i can find some?
As i posted earlier, i have a set for a 2008+, that do not fit my bike.
So i have for sale or p/ex a set of risers, if anyone is interested.
Hi Blackflash, I have fitted "Genmar bar risers" to my A9f. They come in two sizes: K-405 which give a rise of 38mm. & come back 22mm. and K405-B which give a rise of 51mm.& come back 32mm. They cost £94.99p so are not cheap. On the plus side, they fit well and look good and also improve rider comfort. The only mod I had to make was to drill and tap a 6mm. hole in one of the risers (the other one was already drilled and tapped). these are to clamp the brake and clutch hydraulic lines. Go on E-bay & type kawasaki gtr 1400 and they are on the last page, or look under sportouring. Regards Glenn.
Thank you Kwak1, the risers i have, left ok, right one like yours, needs a hole drilled in it.
Thanks for the info on the two diffrent risers. Will look into it.
Cheers B/F
hello
could you tell me where can i buy TopBlock crash protection for my GTR?
thank's
Quote from: sebastian on June 29, 2011, 07:42:19 PM
hello
could you tell me where can i buy TopBlock crash protection for my GTR?
thank's
We bought ours directly from the manufacturer - http://top-block.com/.
Kevin
Added Xtreme stainless exhausts to the list
I have just read the post regarding a good `Hugger`. I ordered mine from Padgetts Kawasaki at Batley, quick service and at a decent price !!!
sidders :)
Fitted KB107 bar risers from MurphsKit this morning, only sat on the bike so far, but the riding position feels more comfortable already.
The give 1 3/8" rise & 3/4" backwards movement.
I'll report back after a ride this morning.
www.murphskits.com
Only 50 odd miles, but enough to feel the difference:
More relaxed riding position (for me) and an even better view in the mirrors.
So I think I've found the optimum riding position & add-ons for my shape/size - 5'10" with 31" inside leg:
Calsci large screen, KB risers & grip puppies
Any more accessories that need adding to the first post?
I'm going to have a go at fitting a pair of these (http://www.webbikeworld.com/lights/motorcycle-led-driving-lights/) today assuming putting the Hexacones on the FJR doesn't take too long. In fact I ought to be doing that now not sitting here but any excuse not to be working on the bikes. I was going to take them to a dealer for fitting until Lyn reminded me that dealers never seem to run the wiring as neatly as I'd like (neither do I but at least I haven't paid for what I do!).
Kevin
Did you source them from a uk dealer? I wouldn't mind a pair on my bike.
No, I bought them direct from the manufacturer (what accessory exists that you wouldn't like on your bike?! ;) ).
Kevin
I've just watched the You Tube clip on them, excellent product. Where are you mounting them on the GTR?
They fit in place of the Allen bolts that hold on the front of the mudguard. Getting on the nut at the back is a complete nightmare and it's still not tight enough but that's probably a good thing for the moment as it will allow me to adjust the angle of the lights as required.
They're quite bright, but not too bright at their lowest setting which is where I shall leave them for now on dip. I can't wire in the 'go to 100%when I put main beam on' because I don't know where it needs to be wired unfortunately. Hopefully I'll be able to resolve that on Monday. I'm quite pleased with them :).
I have a set to put on the FJR as well but that'll have to wait.
Kevin
Here's what they look like once fitted.
I had an email in from Clearwater (the manufacturer) over the weekend and I'm expecting the wiring instructions for the gen. 2 GTR later today.
Kevin
Hmm, pretty damn good. How about the immediate wiring from them, is that relatively easy to keep tidy and discreet? That would be a bug bear of mine, I hate untidy cluttered wiring.
Me too. There's just one set of wires, encased in black plastic, running up from each light to the upper fairing. Hang on and I'll go and grab another photo' for you...[wanders out to garage with camera in hand].
I took a couple which are attached (yes I know it needs a clean!).
I am never happy with aftermarket wiring as it always looks a mess :(. I don't think I made too bad a job of running these in but please don't ask to look at the mass/mess of wiring next to the pocket on the LH side of the fairing where the wires from these meet the two sets of SatNav wiring :(. I'm sure it would be a lot neater if I cut the wiring to length but I'm loathe to do that as these are not cheap and it's my intent to move them on to the next bike.
Kevin
Hmm, all those cables would get in the way of the washing and polishing the bike. Now if they did a set of rechargable light units that would be a good alternative.
Why not use solar powered ones? ;D ;D ;D
Quote from: Lonewolf on September 26, 2011, 11:33:44 AM
Hmm, all those cables would get in the way of the washing and polishing the bike. Now if they did a set of rechargable light units that would be a good alternative.
That wouldn't work because they'd always be flat whenever I wanted to use them. What we actually need is wireless electricity.
Kevin
Kevin, that's a pretty good install. I will be getting a set of those, but for my next GTR.
If you want to see a mess, ypu should you a pic of my front hyperlites install - a total mess. Just can't be bothered to rewire it at the moment.
http://vixfix.com/GTR.htm
Quote from: Andy on February 09, 2012, 12:21:25 PM
http://vixfix.com/GTR.htm
I would suggest that anyone proposing to buy this excellent product check first to make sure that they will fit with aftermarket exhaust end cans, as those available from motorcycle larrys do not
Mia produzione :alza manubri in alluminio estruso, interi e frazionamento.Tutto anodizzato con viti in acciaio inox. http://youtu.be/gCngsraEuCg
MGvalerio.
Cannot see on list :smiley: http://www.philsfarkels.com/ (http://www.philsfarkels.com/) http://shop.heroblobs.co.uk/products/luggage-rack-for-kawasaki-gtr1400 (http://shop.heroblobs.co.uk/products/luggage-rack-for-kawasaki-gtr1400)
Cannot see any reference to handlebar extenders. I have seen the Genmar K405 advertised on e-bay and would be very interested to get some feedback from anyone who has fitted them or information about alternatives. I have been given conflicting information that suggests that the top yoke is not sufficiently rigid to take these risers and have been informed I should consider a top yoke conversion. Any info would be gratefully received.
there's this
http://www.youtube.com/watch?v=kN77mPkEhyc
and here
http://www.bykebitz.co.uk/acatalog/Kawasaki_GTR1400_Helibars.html
I haven't done this mod myself as I don't feel that I need to, but this may be of some help/interest to you :smiley:
Top man, thank you.
Anyone got any experiences with either of these systems? All adverts I have found so far refere to 2008 - onward models of 1400 GTR, which is a concern as mine is a 2007.
Quote from: Gonome on April 01, 2012, 09:08:15 AM
Top man, thank you.
Anyone got any experiences with either of these systems? All adverts I have found so far refere to 2008 - onward models of 1400 GTR, which is a concern as mine is a 2007.
Not got any experience, but the 07 and 08 are the same
Thank you sir.
http://www.powerlet.com/shop-by-vehicle/1/kawasaki-concours-gtr1400-14/product/powerlet-socket-kit-48-harness/159/1 (http://www.powerlet.com/shop-by-vehicle/1/kawasaki-concours-gtr1400-14/product/powerlet-socket-kit-48-harness/159/1)
Updated list with tank pads.
If anyone knows of other accessories that need adding to the main list, can they please let me know
Quote from: Kwikasfuki on April 28, 2012, 03:53:40 PM
Updated list with tank pads.
If anyone knows of other accessories that need adding to the main list, can they please let me know
Ahem.... I may have some suggestions....if it pleases the court.. :whistling:
I have these Engine/Faring Guards from http://www.mcenterprisesusa.com/products/search/dsp_searchForm.cfm
Im so happy with them..
I now have a set of Frame Sliders for sale that was only on my bike for 6 months.
http://projektd.com/product_info.php?cPath=27_39_40&products_id=71
If anyone is interested please contact me :)
NIce one Deb.....the bike is looking good, I love to see the personal touches that nowners add to their bikes
Good luck with the sale of the frame sliders :smiley:
Like the extra mirrors Debs, any info?
the seat looks good, any pics, where is it from
'kin 'ell Deb - how much bling?!!
Not American are you Deb?
olde coney.. Thank you
Gonome... Mirrors are from ebay and covered in Carbon Wrap.
Viper... The Seat is a Corbin. http://www.corbin.com/kawasaki/kc8fre.shtml
Winston... Yes I love my extras.. :laugh:
doebag.. No im not American.. Just all the good extras are :mfr_lol:
Quote from: deb3km on July 04, 2012, 01:01:17 PM
olde coney.. Thank you
Gonome... Mirrors are from ebay and covered in Carbon Wrap.
Viper... The Seat is a Corbin. http://www.corbin.com/kawasaki/kc8fre.shtml (http://www.corbin.com/kawasaki/kc8fre.shtml)
Winston... Yes I love my extras.. :laugh:
doebag.. No im not American.. Just all the good extras are :mfr_lol:
Excuse me for appearing dim (it's an age thing) but were they advertised on fleebay as fitting a GTR? Had a look for them but saw nothing similar.
Definatly got the fastest colour for sure, i do like the mirrors above the standard ones, got a link to them at all please?
Alan
Quote from: BigAlan on July 04, 2012, 03:12:36 PM
Definatly got the fastest colour for sure, i do like the mirrors above the standard ones, got a link to them at all please?
Alan
Alan think these could be them.
http://www.ebay.co.uk/itm/Single-Black-Extra-Blind-Spot-Parking-Mirror-Estate-Car-Van-Truck-NEW-Freepost-/190659395258#vi-content (http://www.ebay.co.uk/itm/Single-Black-Extra-Blind-Spot-Parking-Mirror-Estate-Car-Van-Truck-NEW-Freepost-/190659395258#vi-content)
Not sure how Debs fitted hers as it does not seem she used the universal bracket show in the link. I am sure she will enlighten us. :yes:
Which item are you on about?
Yes the link is the correct ones for the mirrors... Just buy the carbon wrap separate. :) They fit using a bracket that clamps them to your existing mirrors.. Remove the glass by the small screw on the back, clamp to existing and re-fit glass to cover the clamp :)
Quote from: deb3km on July 04, 2012, 08:16:15 PM
Which item are you on about?
Yes the link is the correct ones for the mirrors... Just buy the carbon wrap separate. :) They fit using a bracket that clamps them to your existing mirrors.. Remove the glass by the small screw on the back, clamp to existing and re-fit glass to cover the clamp :)
Ordered and for a fiver they look a bargain.
Thanks
Alan
Quote from: deb3km on July 03, 2012, 10:13:22 PM
I now have a set of Frame Sliders for sale that was only on my bike for 6 months.
http://projektd.com/product_info.php?cPath=27_39_40&products_id=71 (http://projektd.com/product_info.php?cPath=27_39_40&products_id=71)
If anyone is interested please contact me :)
You might want to post the in the market forum.
I do like the mirrors with the bonus that they act as deflectors in the winter.
As for the Corbin seat, how do you find that? Both Roger and myself have tried it, and whilst it was ok, my butt and the seat never agreed.
Crikey Deb! :shocked:
That looks excellent! Some very interesting stuff on your bike!
What's that small dial just left of the left headlamp height adjuster knob? It's probably a clock, but I just wanted to make sure it's not a supercharger boost meter or something.... I can't quite make it out :)
Quote from: Kwikasfuki on July 05, 2012, 12:06:52 AM
You might want to post the in the market forum.
I do like the mirrors with the bonus that they act as deflectors in the winter.
As for the Corbin seat, how do you find that? Both Roger and myself have tried it, and whilst it was ok, my butt and the seat never agreed.
Asif.... I remember it well in fact I reckon I've still got the callouses to prove it :mfr_lol:
Rosbif... yes it is a clock.. Its a Oxford waterproof clock.. When I bought the bike 2nd hand there was a hole in the position, so to cover the hole I put the clock there.. Bonus also is that I dont wear a watch and I dont always want to keep switching the ignition on to see the clock on the dash.
Re:- the Corbin seat.. Its a lot more comfortable that the stock seat but it could do with being a bit wider for my ass... lol
Just added up all my extras and thought I would share with you all...
I have about £2k of extras fitted to baby.. :mfr_lol:
Extras include:-
Corbin Seat
Beowulf Exhaust
Engine/Faring Guards
Rad Guard
Fork Protectors
Front Fender Extender
Rear Fender Extender
Genmar Bar Risers
Brake & Clutch Fluid Ball Ram Covers
Laminar Lip
Throttlemeister Cruise Control
Hot Hand Heated Grips
Tank Cover
Driving/Spot Lights
Extra 12v Socket
Baker Air Wings/Deflectors
Frame Plugs
Blind Spot Mirrors
KwiKover by Laminar
Headlight Cover
Pannier Bags
Private Plate
Also
DAB Radio & Aerial
TomTom Sat Nav
Bagster Tank Bag
:mfr_lol: :mfr_lol: :mfr_lol: :mfr_lol: :mfr_lol:
Debs, all these extras are keeping you awake at night. 0318?
QuotePosted by: Rossendale Rider
« on: Today at 06:45:39 AM »
Well who gets up at a quarter to seven on a Saturday morning? :yawn: :sleep1:
A strange yellow thing in the sky made me!
very interested in the rear fender extender , any details Deb,
by the way, we are all very impressed and i love to see ladies on proper bikes :punk:
Rossendale Rider... I know.. :mfr_lol:
Rosbif... I did think the same thing... :mfr_lol:
Viper... I will take a few pics and post them.. Its made by a guy in the states.. It stops all the dirt going up the back of the bike... :)
Deb3km how do you get on with the throttlemeister?
Been thinking that might ge a good addition.
I also like the engine bars from the USA but there pricey.
Alan
Please tell me about the DAB radio and its installation.
Bloody hell Debs! Look what you have started. You need a thread just for descriptions of your add-ons :banana:
Deb, how did you manage to get the carbon wrap on your mirrors without creasing it. I trieds this morning and got into a right mess. Not helped by the fact there were no instructions with the product when it arrived. :angry:
Alan.. I like the throttlemeister although it would never beat an electronic one.. I did price up the options and this was in my budget :)
Yes the Engine/Faring Bars are pricey.. £400 + £100 import and tax duty... :censored:
Lonewolf.. I have this one.. http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_784513_langId_-1_categoryId_265865
Its mounted in a waterproof sat nav case and mounts on to one of the ball rams :grin:
Gonone... Its all to do with patients... its not easy because of the curve of the mirror case, but if you take ur time and use a hair drying on a slow blow setting it will go on... Maybe your fingers are to big to do fiddly things.. :mfr_lol:
Quote from: deb3km on July 08, 2012, 03:54:20 PM
Alan.. I like the throttlemeister although it would never beat an electronic one.. I did price up the options and this was in my budget :)
Yes the Engine/Faring Bars are pricey.. £400 + £100 import and tax duty... :censored:
Lonewolf.. I have this one.. http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_784513_langId_-1_categoryId_265865 (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_784513_langId_-1_categoryId_265865)
Its mounted in a waterproof sat nav case and mounts on to one of the ball rams :grin:
Gonone... Its all to do with patients... its not easy because of the curve of the mirror case, but if you take ur time and use a hair drying on a slow blow setting it will go on... Maybe your fingers are to big to do fiddly things.. :mfr_lol:
Steady on girl, what would I need a hair drier for? :laugh:
Quote from: Gonome on July 08, 2012, 05:53:56 PM
Steady on girl, what would I need a hair drier for? :laugh:
Do you want me to come and do it for you? :mfr_lol: :mfr_lol: :mfr_lol:
Quote from: deb3km on July 08, 2012, 06:18:40 PM
Do you want me to come and do it for you? :mfr_lol: :mfr_lol: :mfr_lol:
That's what I like about this forum; help the aged :wink:
Quote from: Gonome on July 08, 2012, 08:16:20 PM
That's what I like about this forum; help the aged :wink:
:mfr_lol: :mfr_lol: :mfr_lol: :mfr_lol: :mfr_lol:
- ooi !!
.
For those who have asked further questions... Heres a few more pics..
Pic 1 shows the rear fender extender.. I will try and find the contact email for the guy who makes them in the States.
Pic 2 shows the fender and Hi Viz reflectors that were bought from ebay and cut to size. http://www.ebay.co.uk/itm/RED-3M-DIAMOND-Reflective-Reflector-Tape-4-SHEETS-6-x-9-3Ms-BEST-TAPE-/150852800710?pt=Motorcycles_Parts_Accessories&hash=item231f8710c6#ht_521wt_1301
Pic 3 shows wheel rim decals.. Also from ebay. Cant find link tho :(
Pic 4 & 5 is of the KwiKover made by Laminar. www.kwikover.com
thats great thanks deb, did you have a problem that made you fit the rear fender extender and if so has the problem been solved ? im intersted in this item so would appriciate contact details.
Thanks Debs, definitely need a rear fender extender when you find the details. Looks alot easier to fit than your carbon wrap :hammer:
The problem was the the dirt went up the back of the bike... over the panniers, number plate and top box... Its cut it down a lot and Im very happy with it... It wont appeal to everyone as they may think it looks to bulky and not "sporty" but I use my bike for touring. (Lots of it) :mfr_lol:
Yes it fits with 6 pot rivits and you dont have to take the existing off, contrary to what the instructions say.. :mfr_lol:
thats what i wanted to hear, im gonna get one and just fit it for the long hauls
Ok I have the contact details for the rear fender extender..
The guys name is Larry and his email is
[email protected]Also found these other pics on another forum.. Not my bike tho :)
how much was it?
Want.
Alan
Think it was about £60.. Not sure tho
If we do a group buy I'm sure we can get it for less.
go on then :banana:
Quote from: viper on July 09, 2012, 03:20:37 PM
go on then :banana:
I'm in. Just let me know what I have to do.
http://www.ebay.com/itm/Front-Fork-Axle-Sliders-For-Kawasaki-GTR1400-ZX-14-08-09-10-11-2008-2009-/200680333583?pt=Motorcycles_Parts_Accessories&hash=item2eb97ae10f&vxp=mtr
- cheapest fr axle sliders
- the fit very well
.
I bet that stops the crud from getting at the back of the bike
BUT... god.... its ugly :wacko:
Martin who has recently joined this forum had a great one made by himself on his GTR..I think I've still got the dimensions somewhere....if he's asked nicely he may well provide details :yes:
Do you have the link to it Roger? Can't find it
i think these mudflaps originate from the COG owners site if that helps
I guess some stiff black plastic would do if you could bend and hold it steady while screwing it.
Alan
http://www.zggtr.org/index.php?topic=128.0;topicseen
- the above is the link for the vendor of the Super-Long- Front fender extender and also the Rear Fender Extender.
- cheers
.
- EDIT : and quoting from the maker :-
"Yes, still available, I'll send you a PM. Front is usually $45 and rear $60. Both sent in one box is $95. Includes cost of mailing the package. (price increase on the package deal reflects an increase in the cost of shipping)
Larry."
Quote from: Kwikasfuki on July 09, 2012, 09:34:58 PM
Do you have the link to it Roger? Can't find it
leave it with me Asif...It'll take some finding methinks.
Ok here it is....aren't I a clever lad :banana:
I hope Martin doesn't mind me copying this and posting on here...if anyone uses it then I suggest a 'beer token' or two is sent to Martin :mfr_lol:
Now, I do recall Martin saying that the 'lower' section of the rear fender extender could have done with being a bit wider. :yes: :agree:
View of the item fitted
(http://i336.photobucket.com/albums/n326/oldeconey/MartinRearFender.jpg)
And dimensions for construction
(http://i336.photobucket.com/albums/n326/oldeconey/TailExtenderAluminiumJPG.jpg)
I have been in touch with Larry and will be ordering at the weekend if anyone else wants ot jump in. Confirmed orders only.
im going to wait until we organise a job lot as im sure a few here want it
Hees my new items from http://projektd.com/
New Airwings, Chrome Aero Oil Cap & Chrome Socket Bolt Caps :grin:
:cool: :cool: :cool: :cool: :cool: Debs.... you da girl. :yes:
Debs, what do you think to those plastic bits you have either side of your screen, and what they fixed too?
Debs, regarding your blind spot mirrors, have you got a picture facing them please so I can see the angle on the glass thanks
TS, glass is adjustable so you can have whatever angle of dangle suits you sir!
ProjektD do huggers as well... Both polycarb and Carbon Fibre. I got the carbon fibre unit and it's so easy to fit (15 minutes), and it does the job sooooo well. Much cleaner around the rear shock & regulator in particular
Appreciate I've not updated this thread for a while. Let me know if anything needs adding to the main page
There is a chap in Yorkshire that sells crash bungs or mushrooms for the gtr
Its jaybeebikerbits
Someone else on the forum posted some pics
I ordered some and they came 3 days later.
I haven't fitted them as yet as away but they replace the engine bolt you can see through the gills on the fairing so no cutting etc
Simply plug and play
Updated with that. Any more?
Just fitted a mobile phone mount:
This fits on the Kawasaki GPS mount:
http://www.buybits.com/Product/10272/Ultimate-Addons-3-Lugg-Adaptor-Plate-With-Amps-4-Hole-Layout-sku-10272.aspx
Then attach a universal case:
http://www.buybits.com/Product/10068/Ultimate-Addons-Large-Waterproof-All-Weather-Case-With-Lanyard-127mm-X-68mm-X-20mm-sku-10068.aspx
http://www.mcenterprisesusa.com/products/search/dsp_searchForm.cfm (http://www.mcenterprisesusa.com/products/search/dsp_searchForm.cfm)
http://www.zggtr.org/index.php?topic=16532.0;topicseen (http://www.zggtr.org/index.php?topic=16532.0;topicseen)
Quote from: Andy on February 24, 2014, 02:36:42 PM
http://www.mcenterprisesusa.com/products/search/dsp_searchForm.cfm (http://www.mcenterprisesusa.com/products/search/dsp_searchForm.cfm)
http://www.zggtr.org/index.php?topic=16532.0;topicseen (http://www.zggtr.org/index.php?topic=16532.0;topicseen)
The second link Andy is for the concours C10, they have cocked up on the post. Not relevant to the 1400 GTR.
A lot of links in the first post that doesnt work anymore...
Quote from: Turbony on March 21, 2015, 02:40:19 PM
A lot of links in the first post that doesnt work anymore...
Thanks for letting me know. I'll go through and update them when I get a min
I bought my screen off HPS the maxi in smoked looks great, downside the laminar lip mount broke flat out in top gear, lets say it was a buttock clenching moment, HPS were brilliant sent me a replacement no bother, tried it again, no problems, so probably a faulty mount