Topics

Im going to throw some mobil one 4t racing in the old girl does anybody think i should not. I do hear its a good oil 🤔🤔  wadya reckon folks?

This should rattle some cages. So allegedly there may be no more gtrs after 2017 and if this is true (i sure hope not ) then the question has to be asked what is your next bike? As ive asked the question ill go first. Ive liked the triumph trophy since it came out a while back so that would be my first to look at and its not a rcycled panza at least 👍😀   Problem is once youve had a gtr your only goin backwards so thats how i can justify the trophy lol. Ideas anyone?

Very puzzled  this forum seems to have gone very quiet not much being posted. Where is everybody?   

Hi all. Just wondering if anyone has had this themselves. Get into second gear and gun it a bit and as the revs increase to around four thousand and upwards im starting to hear a clattering sound almost like loud tappets. Its done 56 k now and ive not done the tappet check yet so is it possible its the cam playing up or a dreaded little end bearing. I thought these engines were bullet proof.
Appreciate any input 👍👍

before i go out and actually buy it as its long over due i must admit i was wondering if anyone has heard good or bad about the viper 151 bluetooth lid. Mines about six years old so prob about time me thinks. I want a lid that links up to others but dont want to make schuberth any more wealthy than they are already. Saw it on web n quite like its look. Any heads up at all? 🤔🤔

Hey guys was ambling around fleabay and came up with ebc rotors for less than 150 each. Ebc are a good make and get a good review mostly. Maybe worth checking out if your nearing your limit 🤔🤔

Wondering if anybody has done the throttle reset and feels its stopped the jerkiness at low speed.
By reset i mean ignition on twist throttle slowly till it stops then release back slowly twist again slowly and release slowly. Then turn off ignition. Give it ten seconds then start her up. Should run smoother alledgedly. Anybody tried that one with results ? 

Hi guys
I am at present changing a few things on the bike and while the tupperware was off i noticed the balancer shaft adjusters. Well it was screaming at me to play with it. I know you run engine then crack off ten mill bolt and turn centre shaft with flat blade screwdriver as the end is slotted. Youll see it when you do the job. Soon you will hear a squealing sound remember to turn driver slowly with engine running. As you hear this sound start to back off the driver till it goes then a fraction more and lock off the ten mill bolt. Job done. I noted mine was off by three mill on both adjusters.still have panels off so havent ridden her yet and dont know the result of my handywork. Its supposed to calm vibrations of engine down. Has anyone else adjusted theirs and found a difference at all ? 🤔🤔

Hey guys anyone know the paint code for an 08 neutron silver bike. Is there anyone in essex area who can put it in an aerosol can. Thanks guys.

Hey guys n gals has anyone wrapped there headers in an effort to keep heat down in engine bay. Was considering doing this as I have an 08 which has the smaller vents and does get hot. Whatdya  think good or bad idea? 

Decided to change out wheel bearings. Getting a rumble around 60/65 mph n thought for what they cost if it doesn't solve the issue then it's a job done won't need doing for a while. While wheels are off I decided to do a colour change. Bike is 08 neutron silver. Wheel colour I chose was gold. Any input welcome I won't be offended after all I'm riding it. Just thought the two might go what y'all think.  or 

  guys n gals can anyone advise where I can get my 08 remapped n roughly what it'll cost. I'm in Essex area if anyone knows a place south east of the country. Really appreciate any input    thanks all

Guys n gals just a word of warning  if your transponder warning message comes up on screen then check if ur mobile phone is next to or very close to it because no matter what some have said I promise you the phone does affect the signal and can be confusing the ECU.  Worth a remember   

Guys n gals seem to remember somebody posted a series of pics showing how they refilled the unrefillable(is that even a word🤔🤔) rear adjuster. Does anyone remember that mines just spinning and I don't have a spare kidney to sell to replace shock and adjuster (and I'm cheap😔). Any help would be greatly received 👍😁😁

Hi all just a quick question,was wondering if our discs (08) gtr are semi or fully floating. Did a bobbin release n judder went away 👏👏👏😃😃. Only ask as my old Hondas bobbins seemed a lot freer anybody know or even care lol😏😏