rear brake noise after pad change

[Taz973]

Hi Guys and Gals  changed my rear brake pads a few weeks ago and now get terrible noise when breaking with the rear break now using EBC sintered pads  please any ideas ON HOW TO GET RID OF THE NOISE 

[Boomer]

Check that the pads are fitted correctly.
Also sometimes worth filing a taper on the leading edge.

[O.C.]

SMALL smear of copper slip grease on the REAR of the pad 

Only SMALL and on the REAR ...... it has been known for some to apply large dollops of the stuff on the face of the pad, with obvious consequences             

[Lonewolf]

Also don't some of the pads have a shim on them, I think that's what they are called. Without it you can get chatter each time you brake.

[Taz973]

yi haaaaaa got rid of the noise a VERY SMALL smear of copper grease and the sharp end of the pads taken off and BINGO as silent as ever chuffed is not the word  got to think I WAS back on the old beemer

thanks for your replys GUYS AND GALS  see you all in UK from 5th 21st August