Glasses

[moayling]

Always keep my specs on when putting helmet on. Never had a problem. I take them off before removing helmet.


Sent from my iPad using Tapatalk

[O.C.]

Pete have you considered a monocle  or even Lorgnettes      

[Boomer]

Prescription visor? 

[1ka]

Try a pair of prescription sunglasses. Thick, straight plastic arms slide into the helmet easily. 'reactolite' lenses for summer.  I get mine from Optilabs

[Wookie]

If specs are a problem ....
A Guide dog may help .. however Wook doesn't know any labradors with 100+mph paws 

[StickyOne]

Poor Pete.
Everyone has taken the piss.
Here's the answer to your predicament:

https://www.opticalexpress.co.uk/lens-surgery/natural-lens-replacement

I've done it and don't regret it.
Don't need glasses anymore.

[Charlie747]

There you go Pete

http://www.framesdirect.com/framesfc/BMW-line-pr-l.html

[PRD]

Tried to order them Charlie but they have all been recalled!!

[StickyOne]

Have you tried here Pete?

http://www.espares.co.uk/product/es481564/tumble-dryer-door-glass

[PRD]

Have you tried here Pete?

http://www.espares.co.uk/product/es481564/tumble-dryer-door-glass

will get in touch with them tomorrow!

[davetherave]

Most Shoei lids including the nanotech flip front and most Aria lids .. condor and chaser ..that wot me and her has as spare lids .

Agree

Had Arai's in the past and now wear a Neotech flip, very easy to put glasses on

[ChrisB]

As a teenager my Dad showed me how to make, adjust and repair spectacle frames, he was a manufacturing optician in the 60s. I recently asked the assistant in Specsavers Stockport if they could cut down the sides of my new glasses and straighten them and shape them to my head so they could be used easily with a helmet. She said yes and called it a skull fit or something similar and I await the results. Best bit is they will not charge extra for this service when done with new specs. I must add  that it is not difficult to cut down the sides of the specs and file the ends round and smooth, just be careful to bend gently and if a metal frame, it is easier, just remove the plastic ends, cut down, file smooth, replace plastic end and bend to shape. Plastic frames will need heating before bending. Beware that old frames may have become brittle with age.
Years ago we would remove the sides, cut down at the front end to suit and refit the hinge or joint but modern frames do not permit this as they are made by machine rather than by hand.

[StickyOne]

It won't be too long before we can ride with our eyes closed.
I wonder if Tesler are going to produce a batterybike that rides itself.
No need for the crap Kawasaki silencer!

[virginiajim]

One can always clip playing cards to the wheels.

[O.C.]

One can always clip playing cards to the wheels.