Ruddy cam sensor seal

[Macskwak]

  cant believe the bloody things leaking AGAIN 😡😩 new seal cleaned hole and even put on high temp sealant for good measure. Its an awful design flaw. Anyone got any sure ideas. Im thinking of an oversized seal next time. Ruddy infuriating 😡😡

[PRD]

They appear to be a weak point. Get a dealer to do it and if it goes wrong not your prob.

[Macskwak]

Well hell charge an arm n leg n put in same seal as before so pointless really but see your logic thanks prd. No ill up the seal size this time n make sure i think n after that ill bloody well leave it whatever the outcome. It only smokes once in a while.

[Wookie]

Mack please don't think wook has lost the plot (well anymore than usual  )but clear bathroom silicon does a cracking job it can be used to seal joints between slip on cans as well .
Used it a few times over the years to foil oil leaks and chuffing zorst 

[virginiajim]

That's actually not a bad idea except that clear won't work at all.  Not compatible with the seal.  The seal is black.  You must use black sealant to have it seal correctly.  Change the seal out and then apply something like RTV sealant.....black of course.   Additionally the RTV type of sealant is compatible with automotive uses and temps.

[mikeyw64]

That's actually not a bad idea except that clear won't work at all.  Not compatible with the seal.  The seal is black.  You must use black sealant to have it seal correctly.  Change the seal out and then apply something like RTV sealant.....black of course.   Additionally the RTV type of sealant is compatible with automotive uses and temps.

like this?

[virginiajim]

Perfect! 

[Wookie]

Jim you are a font of superior knowledge ..wook didn't know about the difference between clear silicon and black .
Mack that seal reminds me of a drunken one night stand in me late teenager life 
Woke up and you know that moment when you go ...
OMG ad didn't did ah ? then pray ya mates didn't see ya going off with a heffer 

[Macskwak]

That's actually not a bad idea except that clear won't work at all.  Not compatible with the seal.  The seal is black.  You must use black sealant to have it seal correctly.  Change the seal out and then apply something like RTV sealant.....black of course.   Additionally the RTV type of sealant is compatible with automotive uses and temps.

Sadly jim that was rtv i used n black too. Its soooo annoying but i think ill oversize anyway then heavily coat rear of sensor so it sills out leaving excess t wipe off this time. Hate doin jobs twice or more.

[Macskwak]

Jim you are a font of superior knowledge ..wook didn't know about the difference between clear silicon and black .
Mack that seal reminds me of a drunken one night stand in me late teenager life 
Woke up and you know that moment when you go ...
OMG ad didn't did ah ? then pray ya mates didn't see ya going off with a heffer 

Wooks i married mine lollol 😁  No not true she was bordering skinny but two kids later she gained nice size. Dont you love those wake up in shock moments 😁😁

[virginiajim]

Sadly jim that was rtv i used n black too. Its soooo annoying but i think ill oversize anyway then heavily coat rear of sensor so it sills out leaving excess t wipe off this time. Hate doin jobs twice or more.

We have a member who sourced them outside of Kwackers as none of the Kwackers ones were worth a  .  I believe that they were a tad oversized.  I've got them in a drawer somewhere.  I think I had more than one (2).  This is the year I take it off the shelf and install it..  I know mine is leaking but it hasn't been bad enough to worry about.

Going back through that thread and someone sourced them outside of Kwackers...  https://www.amazon.com/gp/product/B005RUS84I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1.  But you have to buy 20 of the little buggers.

Here's our thread on the subject http://www.zggtr.org/index.php?topic=13866.0 Rich no longer supplies them and I don't see them on Murph's site either  Murphskits.com

I did get an answer that Murphskits.com does carry them, but you should email them and get pricing to the UK should you so desire one.

[Macskwak]

We have a member who sourced them outside of Kwackers as none of the Kwackers ones were worth a  .  I believe that they were a tad oversized.  I've got them in a drawer somewhere.  I think I had more than one (2).  This is the year I take it off the shelf and install it..  I know mine is leaking but it hasn't been bad enough to worry about.

Going back through that thread and someone sourced them outside of Kwackers...  https://www.amazon.com/gp/product/B005RUS84I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1.  But you have to buy 20 of the little buggers.

Here's our thread on the subject http://www.zggtr.org/index.php?topic=13866.0 Rich no longer supplies them and I don't see them on Murph's site either  Murphskits.com


Jim your a star i didnt get em from amazon but got em from simply bearings.com in uk. Thanks for the o ring size tho mate. Helped a lot 👍👍 ill give these a go

[virginiajim]

 

[shaggs147]

Might be worth going to a local seal manufacturer to see what they think. Not very expensive either

Sent from my SM-G920F using Tapatalk

[wildybeast]

hydraulics company may be able to help. take a new one to compare.