Shortest ride out ~~Ever ?

Started by O.C., October 30, 2016, 08:14:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

O.C.

I had things to do today, but as the weather was so mild I just had to ride out.

The TPMS usually takes less than a minute or so to wake up, so as once I got a few hundred yards from home the low tyre pressure (front) warning lit up   :ohplease:  not again.

So I  turned around and returned home with the front tyre pressure down to 30psi.

Close inspection of the front tyre revealed. ..................................absolutely nothing   :smiley: 

So, what happened then ? WELL,  yesterday I replaced both tyre valve caps with some  of these, all I  can think is that overnight the front one allowed air to escape

After being recovered from the roadside with a rear puncture only a couple of weeks ago I decided that on this occasion discretion was the better part of valour.

How weird is that  :wacko:   
 

https://www.amazon.co.uk/Curved-Metal-Steel-Valve-Wheel/dp/B01GVKHJTW/ref=sr_1_1?ie=UTF8&qid=1477858146&sr=8-1&keywords=Curved+head+valve+caps 
BE KIND...


ROG .

gpink

Is there a rubber seal in the new caps?

O.C.

Yes there is, and in fact they look very well made  :yes:   

The valve top doesn't appear to protrude above the threaded part of the valve
BE KIND...


ROG .

Wookie

Have a gander with a mag glass .. maybe just a small protrusion being enough to depress the valve.. or swop front and rear ..and divvent forget the SPIT test  :wink:

O.C.

I tried the  spit test but didn't see any escaping air

I'll check it again int morning to see if there's any further loss of air, I havent put any dust cap back on yet.
BE KIND...


ROG .

Debs

Maybe it's trying to tell you to stop messing with it and just ride..  :mfr_lol:

O.C.

Quote from: Debs on October 30, 2016, 09:27:21 PM
Maybe it's trying to tell you to stop messing with it and just ride..  :mfr_lol:

:mfr_lol:    :agree:  difficult with a flat tyre though Debs   :mfr_lol:   
BE KIND...


ROG .

O.C.

My tyre pressure seems to have stabilised now and a short rude out today confirms that all is okay.

So no more aftermarket dust caps   :no:   
BE KIND...


ROG .

moayling

Quote from: O.C. on November 01, 2016, 08:03:44 PM
My tyre pressure seems to have stabilised now and a short rude out today confirms that all is okay.

So no more aftermarket dust caps   :no:   


Nothing like a good rude out Rog  :mfr_lol: :mfr_lol:

O.C.

:mfr_lol: :mfr_lol:  just noticed that Mo..it'd be rude not to   :mfr_lol: :mfr_lol: 
BE KIND...


ROG .

O.C.

front tyre down at 11 psi before todays short ride out...grrrrrrrr.....blew it up and it held its pressure perfectly

Will check again tomorrow,  maybe I have a faulty valve , so I'll change it and see how it responds

I'm getting a bit  :censored: off with it now  :hammer:   
BE KIND...


ROG .

PRD

Don't suppose it is a Michelin tyre.
BMW = Bring More Wallet

O.C.

:mfr_lol:...could be Pete, ...could be   :mfr_lol:   
BE KIND...


ROG .

PRD

You could change it to an Avon speed master.
BMW = Bring More Wallet

Lonewolf

#14
 Using Michelin PR4's on the GTR I had punctures, using the same tyres on the K1600 I had none......luck of the draw, I think not!  :popcorn:


BMW don't allow their bikes to be inconvenienced with punctures.