Final gear case oil filler cap. (Help).

[GTRpilot]

Any recommended  tools to get this undone  , bent several coins so far, it just doesn't want to budge, thought I'd do this as a quick job  any ideas before I wreck something? 
Took it out to warm up the oil and got a wasp inside my jacket on the way back, now nursing multiple stings of the ribs 
Not having a good day!!!

[jonathan]

A large washer and vice grips.

[GTRpilot]

Small bike spanner and grips, sorted.  but it was on tight!

[BigAlan]

Somehow have a large blunt chisel which fits the slot spot on, used with an adjustable spanner it opens easy.

Alan

[Boomer]

I'm the same as BigAl. Large cold chisel and adjustable spanner. 

[viper]

put some lithium grease on the thread as the aluminium and steel like to fuse together

[GTRpilot]

put some lithium grease on the thread as the aluminium and steel like to fuse together

Thanks, you'd think Mr Kawasaki would have realised that 😕

[pross]

Our cousins across the big pond use a silver dollar.
Don't know if you could google it to find the size/thickness 

[GTRpilot]

Our cousins across the big pond use a silver dollar.
Don't know if you could google it to find the size/thickness 

Our £2 coin comes in two parts, well it does now. The silver centre piece pops out real easy.

[StickyOne]

The wasp experience sounds a bit unpleasant too!

[pross]

Our £2 coin comes in two parts, well it does now. The silver centre piece pops out real easy.

that would be good when some asks to change it 

[GTRpilot]

The wasp experience sounds a bit unpleasant too!

It was a tad painful, neck buff from now on! 

[Burchy]

My tyre levers have got a rounded end at one end and these are a perfect fit

[virginiajim]

I use these now...

http://www.murphskits.com/product_info.php?cPath=130_133&products_id=412

Very easy to get off with the tool provided by Murph.  Before that I used a very large screw driver.  These caps have o-ring seals.  There's no need to put them on extremely tight.

[doebag]

I have just checked mine and had a wrestle with it.
Interestingly Kawasaki do not even mention a torque figure for either filler cap, they just say finger tight.