F1 warning now bikes dead !! NOW WORKS !!!!

[Stolichnaya]

Hi all
Well, what have I done !!  1st time for f starting since wheel powder coat
Started fine but dash said F1. Flashing temp gauge etc. So turned off.
Turned back on but no... No click or anything it's just dead!!

Batteries in fob fine

Any suggestions
Cheers
Stoli

[SirToU]

KLLSWITCH?
Main fuse?
does the dashboard light up?

[Stolichnaya]

Nothing. It dead

It's after...
I've had wheels out. Fairing off.
All back together today. Turned ignition on. Started. F1 on dash n lots of flashing
Turned off.
Turned on... Won't turn on.
Dead

I've separated the grey block. Back together but nothing still
No click on kipass. Nothing
Taken neg lead off battery for 5 mins. But still all completely dead!!

[Lonewolf]

It sounds like it's  .


Have you anyone near you who can run a diagnostic check on it?

[Stolichnaya]

Constructive input!!  It's fooked.
Shall be scrap it then

[BigAlan]

Battery flat?

Obvious fault it might be.

Alan

[Stolichnaya]

No it's got charge. It started n ran for 30 secs till I turned it off due to F1 on dash. Tried to restart n now nothing!

Like it has no battery. Fuses all checked fine. Not a thing on ignition press.
Red alarm light flashing that's all

[BigAlan]

Sorry you have done all I can do, but I bet it's something small and stupid, it has to be as you have done nothing wrong.

Good luck.

Alan

[Stolichnaya]

Cheers. Can't understand why it would start. F1. Then dead.
Wish I'd not bothered with it

[BigAlan]

What happens if you disconnect the battery for say 10 minutes and let everything reset?

It has to be something daft as you have done nothing wrong jus powder coating, I am going to do the same over the next month including the diff housing, and if I can do it anybody can.

Alan

[Stolichnaya]

Already have done this for a few mins. Only removed the negative lead tho. Few mins. Back on. Zip!
I mean nothing!!!

[Stolichnaya]

Well Bugger me... It works now!!

Went out n just thought I'll plug in the optimate. Pressed the key thing a few times n click... It then started but f1 code 39. Left running for a min

Turned off. Pressed key with fob on the square thing n alls well !!  No codes no nothing. Just all working

Bloody gremlins then

Stoli

[BigAlan]

See you have to talk nicely to our bikes, no good swearing at them or upsetting them, nice and gentle.

Glad to hear all is well.

Alan

[Stolichnaya]

It would have been sold within a week ... Trust me

[Charlie farley]

Code 39 is kipass communication error just in case you want to check fob batteries , I think this can happen also if the bike battery falls below a certain voltage .