News:

1400 GTR - A beast

Main Menu

How to touch up frame?

Started by Joe, June 12, 2016, 08:37:39 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Joe

Somehow I've go this mark on my subframe



I'ma assuming someone has scratched it when moving stuff around the yard at work - removals men were in and there's no other damage.

Would normal touch up pens do the job?

Alfor

#1
Carbon fibre sticker because I cannot touch up for toffee  :laugh:

https://www.ebay.co.uk/itm/131589831360

SirToU

thats your trouser leg doing that damage.....  IMO.  its too graded to be impact damage.

It will happen again....  you could use a light grading cloth, and use a grey touchup paint pen (halfords), yes its not going to make it disappear - but it will make it less obvious.

and its likely - you'll be the only one to ever notice it....

Neil
Ride it like it was stolen...
Motogymkhana UK Champion 2011-2014

O.C.

Quote from: SirToU on June 12, 2016, 09:02:23 AM
thats your trouser leg doing that damage.....  IMO.  its too graded to be impact damage.

It will happen again....  you could use a light grading cloth, and use a grey touchup paint pen (halfords), yes its not going to make it disappear - but it will make it less obvious.

and its likely - you'll be the only one to ever notice it....

Neil

:agree: with Neil, I can see the start of some rust there too so a light rub down with something non aggressive like Scotchbright pad and then touch up or better still attach a protective sticker over it 
BE KIND...


ROG .

Joe

Quote from: SirToU on June 12, 2016, 09:02:23 AM
thats your trouser leg doing that damage.....  IMO.  its too graded to be impact damage.

That's a bit shit Kawasaki.

I've found touch up pens on RS Paints but it's £27 for the paint and lacquer.

Has anyone used a Halfords kit or similar and know which one to go for that matches the colour?

SirToU

doesn't make any difference on manufacturer - GSXR750 used to do it with boots on the swing arm.

the only way to stop this happening is - a) choose your clothing more carefully or b) do a polished stainless steel or titanium frame.

Don't think the manufacturers are going to attempt b.  but its worth a shot!

ps.  Gold would do the trick, but its heavy and most probably a little bit too soft as a metal and would wear away!  very expensive.

:-)
Ride it like it was stolen...
Motogymkhana UK Champion 2011-2014

O.C.

I don't think you can reasonably wave a finger at Kawasaki, I've had exactly the same scenario with other makes of bike in the past,  boots and clothing are inevitably going to come into contact with parts of a motorcycle, the older the bike and the more mileage it has covered the greater the chance is of this happening   :smiley: 
BE KIND...


ROG .