Yet Another TPMS topic

[O.C.]

Great

I haven't seen a table on their website

virginiajim can you confirm the diameter before I order?

Cheers

click the button that says Bridgeport tyre valve sizing...11.3 as kwikasfaki says      

[virginiajim]

Right, I click that button and all h*ll breaks loose and you'll blame it on the Yanks.  I'm assuming the link that states Just Here?  Ok, I clicked it and we're all still here.  I'm thinking 11.3 is too big.  Unlike in some things bigger is not better.  Hold on, I have to go into my lab and check the ones that came off of it.

Ok, here is what I have.  The part that goes into the sensor is 8 and a bit mm wide.  The thread pitch is .80mm.  Now bear in mind this comes from a US sensor.   Yours may be different.  11.3 is wayyyy toooo big for the sensors here in the US.

Another thing, the length of the shaft ( ), is 12 and bit mm long.  Too short won't do at all.  And those on the website appear to be too short and not intended to be used with sensors.

[O.C.]

it's fortunate that we know what you are describing there Jim       

[virginiajim]

Yes, indeed..  Otherwise I may be 

[badaboum]

I assume the inner diameter of the valve hole on the wheel

thanks

[virginiajim]

Yes, anything bigger than 8.3mm will not fit through it.

[badaboum]

Jim

Thanks for the detailled CSI work here 

The output of this is that I am stucked :-)

I'll see if i can get it on another website

[virginiajim]

I seem to remember something that these 90 degree stems that Murph sold at one time were intended for Goldwings..  Other than that, I got nothing. 

Well, I may have a solution for you...took about an hour of searching.

http://forum.cog-online.org/index.php?topic=58030.msg442581#msg442581   Honda Goldwing 2014 VALVE ASSY., RIM 42755-MCA-R31

These aren't as pretty as the ones that Murph sold, but they should do the job.  Mandatory disclaimer:  These won't work with the new sensors.  Only the original ones.

[badaboum]

Wahoo

Great digging!!

Indeed, on the COG it seems that the Goldwing 2014 model one will work.

Only issue, they are black, and my wheel is silver so that will be to visible.

I'll have a look and try to see if there is an available silver ones

Thanks

To all,

Did anyone have a link for the battery to purchase ?

Cheers

[virginiajim]

They are silver in that picture.  Where do you see them as being black?

[badaboum]

On his pic it is indeed silver, but when I searched the part on the web it showed up black

http://www.partzilla.com/parts/detail/honda/HP-42755-MCA-R31.html

I beleive there is only one color?

[virginiajim]

Dunno.  You could always paint them silver to match the wheel.  I don't think you'll have much choice in the matter if you want them to fit with our sensors.  I just looked at your link.  Where do you see it's black?  Looks silver to me and the cap is silver as well.

[badaboum]

I am going to go an check with Honda and I'll let you know.

Regarding the battery, 6 months ago, in preparation for the TPMS operation I have bought this:



Is this the proper battery? If yes, I'll buy another one for the second wheel that I need to process

Sincerely

[virginiajim]

I'm not sure about what you just showed but you can get the battery from a few sources..

https://octopart.com/cr-2032%2Fvcn-panasonic-19088802

http://www.digikey.com/product-search/en?x=0&y=0&lang=en&site=us&KeyWords=P668-ND

[badaboum]

Thanks Jim

I beileve indeed that the one I bought is going to be to thick to fit

I have just ordered 4 from your site

Regarding the stem, I think the 2013 goldwing has silver stem and the 2014 model have black stem

I am just getting trouble finding the PN for the 2013 silver one.

I'll keep on digging

Cheers