Any Feedback on these Mods please for a Newbie

[Stolichnaya]

Hi Guys n Gals
Ive been looking at mods for my 2010 GTR...  to make things more customised for my riding and the wife.  input on these would be greatly received.

1. Rearsets.  the std foot pegs are too high for me.  seen these at a remarkable price !   http://www.ebay.co.uk/itm/301380685833?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

2. cruise control.  I have an Omnicruise on my GSX14 - untried as yet.  seen this type - anyone use this?  easy fit? http://www.ebay.co.uk/itm/281688688961?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

3. Screens. wanting something a little taller.  seen this... http://www.ebay.co.uk/itm/MRA-X-Creen-Maxi-for-Kawasaki-GTR1400-2007-2014-/221989059532?hash=item33af943bcc:g:yHgAAOSwwPhWj3d8

4. I have a TomTom Rider v3.  whats the best place to pick up power to it?  Battery?  looks a pain in the bum to feed wires up the fairing! 

5. Optimate for GTR.  is there an easy run for the wire?  I don't really want to take the bike apart only to be told "if you take the one screw out...."

cheers guys
Stoli

[PaulB]

4. I have a TomTom Rider v3.  whats the best place to pick up power to it?  Battery?  looks a pain in the bum to feed wires up the fairing! 

5. Optimate for GTR.  is there an easy run for the wire?  I don't really want to take the bike apart only to be told "if you take the one screw out...."

I power my Garmin from the accessory socket. But reading a previous thread, I understand there is a 12V feed under the left hand cover at the top of the fairing. That's on my to-do list.

As for the Optimate, you can feed the wire through the right hand "vents" in the fairing (once you've removed the battery cover, and battery retaining clamp and wired it to the battery of course)

Hope that helps a little.

Cheers

Paul B.

[Stolichnaya]

cheers Paul..  all helps get a newbie under way

[pross]

As stated under the cubby hole storage on the left is a rubber boot covering 2 bullet connectors the leads arnt very long buy the same size and crimp the opposite ends to your sat nav they turn on and off with the ignition.
I removed the storage couple of fixings easy Peasy easier to do
There is also 2 more under the seat . Do a search on here I'm sure there are photos and location pics .
The optimate I connected to the lead supplied to the battery just sticks out the faring a bit .

[Stolichnaya]

cheers.  are these bullet connectors "free" as in unused and spare?

[pross]

cheers.  are these bullet connectors "free" as in unused and spare?

Yes mate a positive and a negative black cables one has a strip (  on mine anyway ).
Not much spare cable on them but you should have enough on your Satnav.
I used the front .

[Stolichnaya]

outstanding!  thank you

[pross]

No problem mate.
Like I said do a search for info and ask a lot of things are covered .
Mr Wolf posted bullet sizes if I recall

[doebag]

This thread here

http://www.gtr1400.co.uk/forums/index.php?topic=5063.msg68278#msg68278

[Stolichnaya]

Brilliant thank you

[O.C.]

The rear sets look like a lot of engineering for relatively little money, I would advise checking to see that they will actually fit your bike

As for  a better screen maybe consider a Laminar Lip they do work, look okay, good quality  and are reasonably priced   

http://www.ebay.co.uk/itm/Laminar-Lip-for-Kawasaki-GTR1400-GTR-1400-screen-/221137312319

[Stolichnaya]

The rearsets are crazy cheap. I find the std pegs a snide too high for me. For £70 it could be a great fix. I'd ask how many sold and feedback tho

I'm wanting a tinted screed. The X-creen is smoked and has a lip so may have a go with it.

[Debs]

I have the Laminar Lip on mine and does everything I need.. 

[davetherave]

Those rear sets are beautiful for the money, they state zzr1400, are the two bikes footpegs the same set up ?

[O.C.]

Those rear sets are beautiful for the money, they state zzr1400, are the two bikes footpegs the same set up ?

  which is why I posted my observations above