News:

1400 GTR - A beast

Main Menu

PUNCTURE REPAIR KITS.

Started by clarky, June 04, 2015, 07:06:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

clarky

Hi Guys, whats the best puncture repair kit for getting you home? Can anyone suggest something thats reasonably easy to use on the roadside?

snowy

I've used the standard "Plug and glue" with CO2 charge / refill on 2 occasions, worked a treat for me. :scooter:
I'd like to change to an aerosol stylee repair, the Petronas Durance gets really good reviews, but are these OK to use with the Tyre Pressure Sensors, or will they be damaged beyond repair if any solutions added to tyre?   :undecided:
Expensive fix if so!
Patience is something you admire in the driver behind you and scorn in the one ahead.


Dick Snow.

Kwikasfuki

I use something similar to this (mine comes with glue, cutting balde etc): http://www.ebay.co.uk/itm/CAR-VAN-TYRE-MOTORBIKE-PUNCTURE-REPAIR-KIT-WITH-10-STRINGS-sale-/161706741307?pt=LH_DefaultDomain_3&hash=item25a6790e3b

And I carry a portable tyre compressor that works off 12v.

Works fine for me
Find the forum useful? Please think about donating<br /><br />Kawasaki 1400GTR 2009 - 2012<br />Honda XLV1000 Varadero  2007 - 2009<br />Suzuki DL650 V-Strom 2005 - 2008<br />Kawasaki GPZ 500s 2004 - 2005<br />Yamaha SR125 2003 - 2004

viper

because of the tps issue I no longer carry a sealant or have slime inside my tyres ! I just carry a plug kit with a 12v mini compressor. if you have never repaired a puncture at the road side  id suggest that when your tyre is next ready to be replaced id have a go at deliberately puncturing it and then trying the plug method with one of the readily available kits . I also carry the correct tools that would enable me to remove either wheel and practised wheel removal when I first got the bike .

nightrider

What do you use to keep the front end up if you had to remove the wheel ,

O.C.

Quote from: nightrider on June 05, 2015, 08:01:56 AM
What do you use to keep the front end up if you had to remove the wheel ,

The old trick is to put the bike on its centre/mainstand and apply weight to the rear of the bike, thereby raising the front, you often need help to do this though   :yes:   
BE KIND...


ROG .

Kwikasfuki

Quote from: viper on June 04, 2015, 11:34:57 PM
  id suggest that when your tyre is next ready to be replaced id have a go at deliberately puncturing it and then trying the plug method with one of the readily available kits .

Good idea. I now know how to do it properly, but the first time was half a job.

With the long sticky sticks, you hook them onto the tool midway, and then push right into the tyre (so only the tool is visible, not the sticky stick). Then you twist and pull out, which brings out the sticky stick doubled up on its self. Then you cut the excess.

I know its a temp fix, but I rode my bike for ages with it in without any issues
Find the forum useful? Please think about donating<br /><br />Kawasaki 1400GTR 2009 - 2012<br />Honda XLV1000 Varadero  2007 - 2009<br />Suzuki DL650 V-Strom 2005 - 2008<br />Kawasaki GPZ 500s 2004 - 2005<br />Yamaha SR125 2003 - 2004

Foody

I use the glueless Plug n go.

It's simple and very effective.   The trouble with the glue/mushroom kit is if the glue doesn't set properly you can't redo it.  With the glueless one you can.

Also I found that there was only enough glue for one repair.
The glueless kit is about £25 and I think it's worth its weight in rubber.

Alfor

Any links to glue less kits that anyone can recommend?

pross

I carry one of these in my top box plus a 12v compressor I run of the socket on the dash.
Just make sure the plugs don't dry out they need to be kept lubricated like when new to help fit.
There is a link below to watch a video .
I also carry co2 cartridges instead of the compressor about 4 16g one the bike will need around 3 to inflate

http://youtu.be/3NfuBFNaA1U
Pross

pross

#10
I had it fail to plug once called the AA they put that green slime in and that failed as well then when the Rear tyre was replaced the slime had to be washed of the wheel and TPS sensor with warm soapy water.
Mind you I have attached a picture of the Welsh slate I bought back across the border  :mfr_lol:
A pound coin and tape to show the scale
Pross

mark1400

I use this, worked great for me & real quick to do.

Gryyp Cargol Turn & Go Motorbike Motorcycle Tyre Puncture Repair Kit Compact
ebay
eBay item number:
171812743851

Alfor

Thanks for the link - appreciated!

viper

#13
That turn and go kit, if it works, looks quite good , although I never personally got those c02 cartridges to work properly so I just carry a mini compressor . nice kit



http://www.ebay.co.uk/itm/171812743851?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D171812743851%26_rdc%3D1






Alfor

I'm assuming the normal personal roadside assist service will fix a puncture. Does anyone have any negative experiences of this from the AA, RAC, green flag, etc.?