bar risers ?

[BigAlan]

Alan, I can see a little cottage industry forming   

Possibly, in the ideal world i would borrow some tonight and use them over the weekend in France/Belgium and copy them next week if they do as they say on the tin.



Alan

[winnsworld]

I've got some in the garage that I bought from someone here but not got around to fitting them yet. Maybe I'll try this wet weekend!

[Bryn]

I've got some in the garage that I bought from someone here but not got around to fitting them yet. Maybe I'll try this wet weekend!

After Big Alan's borrowed them of course 

[MGvalerio]

bar risers 60 mm.with extraction of 12 mm. of the fork legs.
The GTR 1400 is more maneuverable at low speeds with said operation.






MG valerio.

[Bryn]

MG, do you mean the steering is quicker when you raised the forks in the yokes?

[MGvalerio]

MG, do you mean the steering is quicker when you raised the forks in the yokes?

Yes Bryn 

MG valerio

[Bryn]

Thanks MG ... I find mine tends to understeer a little ( PR3's fitted ). May be worth a fiddle 

[Stephen.Stallebrass]

Fitted mine last night, the ones with the Ram Ball and Powerlet socket. Only had a short comute to work today but it's like day and night. HUGE improvement, I don't reckon I'll bother with the sport touring adaptors that bring them back about another inch or so. Look forward to a long ride to test them out.

[gwocni]

Fitted mine last night, the ones with the Ram Ball and Powerlet socket. Only had a short comute to work today but it's like day and night. HUGE improvement, I don't reckon I'll bother with the sport touring adaptors that bring them back about another inch or so. Look forward to a long ride to test them out.

Ye haaaa, this is what I ordered....

[gwocni]

They arrived and are now fitted ............... Brilliant. 30 Min job from start to finish :)

[BigAlan]

I just tried to fit the risers I got from Mr Wolf but could not get the slack I needed on the right hand throttle cables etc?

Is there a secret? I nudes the two small bolts holding the fluid pipes but could not get enough slack to fit them.

Must have a weird bike.

Alan

[Lonewolf]

Al they came straight off Lamins bike and the cables weren't over stretched on his. 

[viper]

I just tried to fit the risers I got from Mr Wolf but could not get the slack I needed on the right hand throttle cables etc?

Is there a secret? I nudes the two small bolts holding the fluid pipes but could not get enough slack to fit them.

Must have a weird bike.

Alan

once you have removed the 2 bolts there should be enough ( just ) slack, follow the cables/pipes down the forks and make sure they are not cabletied, you may have to redo the ties in order to release a bit more slack